My Homemade Skis

Brit1275

Brit1275

Active member
Basically I'm making my own skis. If you're interested, check out the site:

Stumpysticks Website

Let me know what you guys think of the site, and the project!

--------------------------------

Dont worry, its a controlled slide.
 
i think its a cool project. its great that K2 helped you out as well...good luck with your new skis.

Deb: What are you drawing?

Napoleon Dynamite: A liger.

Deb: What's a liger?

Napoleon Dynamite: It's pretty much my favorite animal. It's like a lion and a tiger mixed... bred for its skills in magic.

 
I am doing an Engineering designe project on sksi, and hopefull yat the end of my research i am gonan use my finred in highskool to get into thier shop classes and make my own skis.

HÉLmµT- HiGh SNow!
 
i went all through your site. those are ill. looks like a lot of work. good job.

my level of radness... it just can't... be quantified.
 
Well done.

You're still herding swine as a profession -Anewmorning

Dont start with me...

Ill get drunk tonite and make posts that will make your eyes bleed -Lord_Piot

But, you can always fall back on your degree in... Communications! Oh, dear Lord!

I know! Is phony major. Lubchenko learn nothing. Nothing!

Our greatest glory consists not in never falling. But in rising every time we fall.

 
yeah man, im impressed. thats good stuff. how about some demo days? ha.

_____________________

You know the Nazis had pieces of flair that they made the Jews wear.

once back when i was a fetus i was aborted. it didn't hurt at all, but i was also high on life at the time. - thisangelicrage

its not rape....its surprise sex. you wake up and SURPRISE you had sex with me haha - huckster989

liberals think killing babies can be both fun and profitable, while conservatives think killing foreigners can be both fun and profitable - ice-is-scary

 
sweet, thanks for the comments guys.

so the site looks ok? anything I should change or add? I'm new to website stuff.

--------------------------------

Dont worry, its a controlled slide.
 
i will likely be emialing you soon, when i gte more time.....since i am very intrested in the designe of you skis and if you knew any thing about what your turning radius and whatnot would be beofre you built the skis. I like how the press was made too, and did you use abs sidewalls? i couldn't tell, but it dind't look like it. And what is your wood core? what type of wood...ok soryr i will just emial you in a couple of days! thansk!

HÉLmµT- HiGh SNow!
 
sweet project. site looks good but you need to change the title. at the top of my browser it just says 'adobe go live 5' or some shit :p

 
yeah, i noticed the golive thing, hahahaha, OOPS

I will add some more content on the details of the construction too (probably tomorrow) explaining the materials and all that.

but to answer your question quickly, yes, the sidewalls are ABS.

--------------------------------

Dont worry, its a controlled slide.
 
i have only completed one ski, i will be testing it this friday, i'll update the site with that info.

i'll be skiing with it, and one old 1260, hahhahahaha.

I'll see how that goes!

--------------------------------

Dont worry, its a controlled slide.
 
ha, awesome, where at?

_____________________

You know the Nazis had pieces of flair that they made the Jews wear.

once back when i was a fetus i was aborted. it didn't hurt at all, but i was also high on life at the time. - thisangelicrage

its not rape....its surprise sex. you wake up and SURPRISE you had sex with me haha - huckster989

liberals think killing babies can be both fun and profitable, while conservatives think killing foreigners can be both fun and profitable - ice-is-scary

 
Nice job man. Those skis look just like the first couple of pairs I've made - black with the white sidewalls. I noticed that you're somewhere around Seattle right? I've got a cousin who's making his own skis around that area with some friends. By the way, why didn't you vertically laminate your core?

If you guys want to learn how to make skis, it's not hard or not even that expensive. A site is coming up soon that'll teach you how - for free. No videos or any of that bullshit to buy. To make a ski (including all of the equipment) costs as much as a regular ski costs and the results you get are pretty awesome. Corporate skiing sucks.

 
what do you mean vertically laminate the core? like a few layers?

i used one solid piece of wood, and it was a bitch to work with (too thick)

crystal guy, I will be at snoqualmie friday.

--------------------------------

Dont worry, its a controlled slide.
 
well, from your pics it seems like you took a single piece of wood and simply profiled it right? Normally, you would take that single piece of wood and rip it into strips (1/2' - 1')with your tablesaw. Then you would glue/laminate these strips together. This way you elimanate all the weaknesses of the knots and other irregularities. It also makes your ski a lot stiffer torsionally.

 
nice job sean, website looks good too. hopefully i can do something very similar for a project down here at school

------------------

DETONATION

----------

NWFT
 
Yeah well done, looks good so far. Thats good that K2 seem to be getting right behind you.

Mark: 'Timo how do you sleep in Finland when it's light all day long?'

Timo (Fireside Lodge pimp) 'You just close your eyes'

Member# 101
 
ill cop a pair its its under 500 US

(tom)
----------------------

Life is tough. Its tougher when you're stupid

my school mates always said that they would fuck anything that could walk. i never saw why i had to limit myself.
 
thats pretty sweet! looks like a lot of work, but props for figuring it all out and coming up with some sick looking skis.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

watch out I have BADD
 
looks sick

Hopefully I will be skiing the Big K in VT until January, and the other K in CA for the rest of the season.
 
Oh, I get what you're talking about billy bomba.

I will probably do that for the next ski. For this first one I used poplar for the wood. It was about $8 for the piece, where as maple was about $30. The poplar seems ok, not as hard as maple, but I made it very thick so its very stiff.

For the next one I might do maple and poplar strips, just like you said.

For now, I won't be having any for sale. If I really get everything nailed down by the last pair (I've only got enough material from K2 to make 3 more skis) and the whole process becomes much more streamlined, I will think about producing a number of pairs. Not sure what the cost would be, I'd have to think about that some more. Much MUCH cheaper than any other equivalent ski on the market, but I couldn't garuntee them at all... afterall, they are homemade!

Thanks again for the comments, keep them coming. Send any major questions to the email on the site:

stumpyengineering@hotmail.com

I will be posting the questions I get and answers to them on the site.

--------------------------------

Dont worry, its a controlled slide.
 
that's sweet man! how much does it cost you to make a pair? (even though I know you only finished one ski so far)

______________________

Screw this I'm going skiing
 
I need to go through everything to figure out the exact cost.

I spent more money in things like the press, etc.

The materials aren't so bad, carbon fiber's pricey though! But sexy as hell!

--------------------------------

Dont worry, its a controlled slide.
 
ah man thats so cool!

Props to you man!

but I thought crabon fiber didnt bend!? Like if it bended, well it would pop back to place

Also known as ~Skier_Simon~

East Coast Skier
 
its got plenty of flex in it for a ski. its tough stuff, brittle if bent too much, but taken in short lengths (looking at a short section of ski) it really doesn't flex all that much.

--------------------------------

Dont worry, its a controlled slide.
 
thats awsome man , how long did it take in total ?

member#13687

'i just rented good will hunting , how is it?'

'lets put it this way, even matt damon cant make it suck.'

'matt damon? hes in con air right?'

'yes , yes he is.'
 
so you have only made one ski? not even a pair of skis yet? and you have material for 3 skis? or 3 pairs of skis? I think i am gonan tyr and get my mateail from Prior cuz my dad puts in orbers for his lodge, so i can probally work out some deal with materials...but i'll be looking forward to seeing the updated site with more info soon. Didd you do this for any skool credit? or was it just .....for fun? i was gonan just do it for fun, but now i can do it for skool too, which means i'll do a better job.

HÉLmµT- HiGh SNow!
 
no school credit, it was just for fun.

I've been getting way too many messages, if you have a question EMAIL ME.

I won't respond to many messages I get one here.

stumpyengineering@hotmail.com

Email me there!

--------------------------------

Dont worry, its a controlled slide.
 
the hard part was getting the edges and ptex

________________________________________

''huckbunni, i would appreciate it if you never ever, spoke again, becuase quite frankly your comments are wasted megabytes that would literally be better used to show videos of a cat playing with string.'' -APE
 
GOD GIVES YOU MAD PROPS

that is one sick project man...keep it up

Building a jib? Need some help or wanna give others some too? Then check out the Build-a-Jib cult by PM'ing RodeoKId
 
FINALLY SOMEONE MADE A SKI OUT OF CARBON FIBER! IVE BEEN WAITING FOR THIS!!!

------------------------------------

Bristol Mountain Sucks

The Juvenile

Member # 44610
 
Carbon Fiber/Kevlar edges would be sick!

------------------------------------

Bristol Mountain Sucks

The Juvenile

Member # 44610
 
^^^^uhhhh, no, that would not work unfortunately, haha.

Goode makes carbon fiber skis, about $900 I believe, all different kinds from race to powder... but no twin tips, the bastards!!!

--------------------------------

Dont worry, its a controlled slide.
 
you made skis! that's frickin awesome

hardcore lousiana fanboat shit

'fuck! there's a damn boulder on the slope'

'put butter on my butt and call me a biscuit!'
 
damnit! How about C555 or Titanium?

------------------------------------

Bristol Mountain Sucks

The Juvenile

Member # 44610
 
meh, steel is easiest and cheapest!

especially if you're gonna be railing them, no need to put anything expensive on there.

--------------------------------

Dont worry, its a controlled slide.
 
You must log in or register to reply here.
Back
Top