Marker brakes

yes. a 110 will fit perfectly on a 115 if you just pull on the brakes a lil. think about it. its 2.5mm on either side.
 
14158443:ScaryDumpTruck said:
You might need to bend them a bit

people always say this but reality is pretty much all brakes are wider than their advertised width. Plus, most of the time all that's required is shaving down the inside of the plastic on the tips of the brake.

Don't bend unless absolutely necessary, unless you're good at it, it can have your brake sit at weird angles outward from your ski.
 
14158538:.nasty said:
Plus, most of the time all that's required is shaving down the inside of the plastic on the tips of the brake.

that will just happen naturally stepping into the bindings a few times skiing.
 
Back
Top