Whats your guyses longboard setups>?

charmander

charmander

Active member
i rock a loaded dervish with gullwing charger trucks, seismic 77 wheels and bones swiss bearings.

what do you dudes ride?
 
^I was thinking about a dervish. but my set up right now is a bustin cigar with gullwing mission II. Clay bearings and 3dm slalom wheels. For slalom it's a blizzard superfree (30") with trackers and zig zags 65mm.
 
Sector 9 (yes I know everybody and their mom rides one) bamboo/fiberglass pin, with stock trucks/wheels/bearings.
 
flex dex pro 40. abec bearings. gumball wheels. seriously fiberglass is the way to go. I looove it. and its soo heavy and smooth.
 
i ride a earthwing superglider, with randal 150's, abec 11 bearings, and pink powerball wheels. Its a pretty sick overall setup if you ask me.
 
i'm also rockin the sellout sector 9, the original pintail and i just upgraded the bearings leaving the trucks and wheels stock. i do want to get a loaded kracked skulls m1 or shimitar this summer, still haven't decided.
 
got a 41" phase 1 pintail, 70X50mm 75a sector 9 wheels, abec 5 bearings and generic 150mm trucks.

question though: i get wheelbite like a bitch. will using a dremel to bore out some wheel arches completely rape my deck? i know it wont be especially good for it, but would it screw it up completely? i wanna do this as a stop-gap for a couple months til i can get a new deck
 
Landyachtz conthung with a clearcoat base(sanded of the paint) stock trucks(I don't know the name) Sector 9 72mm wheel(naked chi cks on them) and momentum bearings

shows how much I know, I just like cruising though
 
fibreflex board that i just got. not sure of the trucks and stuff off hand.

dogtown board with revenge trucks.
 
Arbor deck, 46 inches i think, Some randle 150 trucks and some abec 11 grip pin wheels and some stock bearings.
 
I have a flexdex slalom 30 with lightning 2 trucks, kryptos classics, and reds, medium bushings front and rear, for cruising around and all but the biggest hills. its 11 years old now though so for christmas my girlfriend got me a landyachtz evo with randal 180s. I run it with zigzag 70mm 78as for cruising and a set of flywheel 97mm 81as for bombing, both with revolver ceramics, hard bushings in front medium in rear
 
well now that were doing skateboards i got a krooked big eyes small, krux III's, red bones, and cored element wheels.
 
I have for cruising...

loaded fish board, tracker RTS/RTX 139 combo trucks, abec 11 retro zigzags 70mm wheels

for bombing/speed carving...

comet voodoo board, crail DH trucks, 76mm sector 9 goddess of speed

wheels for extreme traction/ pink powerballs if i want drifting
 
ACFD009.jpg


This with Grizzly Trucks and 77mm Hawgs.
 
haaha i bought a like 80 dollar setup on ebay and put abec 11 gumballs with nice abec bearings on them with the shitty trucks and deck and it handles everything better than all of my friends 200 dollar+ setups, everyone always wants to ride mine instead.
 
my dervish isbin the mail. pink big zigs, gullwing chargers a bones reds bearings for now.... currently riding sector 9 chaos, stock stuff
 
Current setups! (as of like 2hrs ago... they like to change and intermingle)

1. Bright Nation dancer (5ft) with RII 180's and S9 goddess of speed 72mm 80a (don't quite me on the wheels) with mini logo 10$ bearings, use those on all my boards.

2. Snowboard cut out into dervish-like shape (predeceses the dervish tho) with gullwign trucks, krypto classic wheels and same bearings.

3. Landyachtz Evo with randal dh's with lathed stock busings with kryptonics 85mm, 82a (best wheels ever, EVER for drifting). mini logos too

4. Alien workshop skate deck, with destructo trucks and 67mm 92a santa cruz bullet lime green wheels. A slider board

5. Big Banana, and 70's plastic board that's about 2 feet long and 4-5" wide. with matching yellow wheels and open-style bearings

6. Sector 9 tikehau without trucks, I need to pick up a new set for it, it's gullwings got stolen by my snowboard deck today
 
totem treefrog (mini) with tracker rts & rtx trucks and purple skunk wheels for dicking around

landy wedgeflex w/ rII's and some s9 wheels for carving

and soon to have speedboard

all new insect firefly or subsonic pulse (modified to be speedboard) with confederate precision trucks and bennett 71mm alligator wheels and venom bushings and prob. builtins

my goal is to hit 50 or 60 mph this summer

 
I wanna try that shit too.

I ride the Kracked Skulls M1 (46", abec 5 bearings, 70mm flashbacs, randal 180's)
 
You must log in or register to reply here.
Back
Top