Urgent Booster Strap Installation Question

[SteveDorsey]

Ok so I got my booster straps for my lange comp 120 freeride boots and i have a question on installation. Do I put holes in teh back of my straps so I can attach them to teh boot via teh 2 screws in the back or do you not attach the booster to the boot at all, like just slide it in place and tighten. A response would be really helpful cause im lookin to try um tomm. And i know this shouldnt be in ski grabber but i figured id get an answer quicker. Thanks.

 

[WONTON]

holes. Just put them in place of the standard strap

 

[SteveDorsey]

thank you thats what i figured

 

[JaphyRyder]

i dont put the screws in mine and they easily stay in place. i would think holes would make the strap more suseptible to snapping later on. just my opinion tho

 

[3ski6guy0]

i used a sautering iron to burn holes then screwed the strap in

 

[IHOP]

^ Yeah, burn holes where the screws are going to go, then screw them into your spoiler.

 

[erknz]

heat up a nail with a blow torch for optimum holeage.

 

[SteveDorsey]

^ that was what i was thinking. do you guys put the booster in our out of teh plastic of teh front of the boot

 

[skiman540]

did you guys get screws with your booster strap? i just got the strap with mine. i dont get where the screws would go into the booster strap, maybe im just retarded

 

[JaphyRyder]

the screws are from your old strap. and this whole thread is about making your own holes in the boosters which have no holes

 

[Jib_This]

Just rivet it on. Problem solved.

 

[Literature]

This depends on your boots. If need be, you can drill a small hole in the back of your boots, then put a screw into it to hold the strap on. I love my Booster Straps. They saved my evening tonight when my top buckle exploded.

 

[Burrito]

You're supposed to put them inside the shell, but I have kryptons and their flex has a lot to do with the shell tongue, so I keep them on the outside.