Taking apart Crowbars: A How To

[skinnylove]

Step 1:Take the lens out, if your having troubles already, your not ready to do this. This step if fairly self explanatory. It's also not necessary but makes things a lot easier. What you have now should look like this.

Step 2ut one of your hands on the frames and one on the outriggers. Pull until they pop away from each other. Repeat on the other side. Don't worry about putting too much force on them here, they will never break.

You should now have a strap with outriggers, a frame and a lens.

Step 3:To get the outriggers off the strap, use your thumb and push the smaller tab (the one that is usually closer to the frame) on the back of the outrigger, until you hear it pop out.

Now pull the strap out so you have about half an inch to an inch in between the outrigger and the plastic tab. Turn the more curved end out the plastic tab 95 degrees and push it through the little square opening that you can see in the outrigger.

Continue pulling the strap out until it comes all the way out. Repeat for the other side. Now your crowbars should be fully apart. You should have a frame, a lens, a strap and two outriggers.

It should be fairly self explanatory to get the goggles back together. Just reverse these steps.

 

[Silence]

nice post mate...definitely helpful

how the only issue is how to get extra parts outside of the crowbar part trading thread!

 

[breckfreeskier]

well done.

 

[[nick]]

nice, + karma

 

[skinnylove]

**Note for putting them back together.

I find it easiest if you put the outriggers on the strap first, then strap and outriggers onto the frame and then lastly, put in the lens. Putting the outriggers back on can be difficult, it takes a lot of patience. Sometimes I can do it in a minute, other times it takes me ten. I find it easiest if you put on the bottom first and for the top, force the more pointy end in first and let the less pointy end drop in.

 

[VT_scratch]

now on ur thumb, wold that be blood or nail polish???

 

[skinnylove]

that would be from when i slammed it in my p12's three weeks ago.

 

[Silence]

^ oowwwwwwwwwww

 

[skinnylove]

yup. it's still kinda tender. sucks, never do it if you can avoid it.

 

[skibikeclambake]

should be stickied i think

 

[paulbunyan]

nice post i forgot how to do all this stuff

 

[=nick=]

nice sticky attempt, but its easy as hell to disassemble crowbars, all you need is a strong will and a little logic!

 

[skinnylove]

i didn't have any hopes of getting a sticky, crowbars aren't universal enough to get a sticky. i just noticed lots of people asking how recently so i decided to help.

 

[Min_Soo]

Thanks a lot dude! It was a lot of help! +++++Karma!

 

[alaskakid]

Someone should explain how to take out the lenses of my wisdoms. I am kinda scared to apply too much pressure to them, because if they broke my parents would cut my nuts off. Please do help

 

[paulbunyan]

just pull the top and the bottom nose peice and they will pop out. its hard to get them back in thou

 

[skinnylove]

keep this active bump.

 

[dave44]

this pic confuses the hell outta me but maybe i've just hit my head too many times

 

[.jc.]

^h'es just showing an example of pulling the outriggers away from the frame

 

[AntifreezeSteeze]

ouch that thumbnail looks a little bruised...

 

[paulbunyan]

BRINGING IT BACK! STICKING THIS!

 

[paulbunyan]

your popular enof on here get someone to sticky it!

 

[skinnylove]

This is true.

 

[gabfreeski]

this thread help me very much and it need to be sticky

thanks

 

[paulbunyan]

well i think personly this is as important as boot fitting

 

[paulbunyan]

i see what you mean now

 

[BEARS.]

thank you so much! this helps a fucking lot.

 

[Dr.smooth]

Nice job man, thanks!

 

[ogfeez]

Ouch on the thumb!

 

[skiizy]

nice thread bump up to find easier

 

[Silence]

tutorial forum which can only be edited by mods who can take threads from other forums and post them there?

 

[Frik]

I agree 100%

 

[uni-corn]

My threads

 

[lyndon]

Yeah man, mine was purple from the end of April, 2007 until mid October of 2007...thats 6 months! It was my middle finger, and I STILL dont have feeling in the very tip.

 

[masta_LE3B]

i was wonderin how you get the straps out, thanks

 

[StReEtPIRATES]

definatly sticky

 

[scratchskier321]

Its easier to use a penny to pop the strap out from the outrigger

 

[yellav]

i cannot get the strap out for the life of me.. someone help?

 

[yellav]

nevermind penny worked

 

[huckaberry]

thanks bro that helped so much now i can do the trading threads

 

[ogfeez]

just remember who showed you this, ballerrrrrr

 

[Hans_]

Der er ild i den

 

[the.hoffman]

i honestly cant pop the rigger off the strap. any suggestions? i tried the penny

 

[skinnylove]

Shit, I forgot about this.

 

[Farquaharson]

bump. this helped so much, thanks bud

 

[pianoman]

thanks +karmz

 

[SoulSkia]

It seems pretty self explanitory to me but i'll give you karma for your hard work

 

[0123456789]

bump for my new knowledge on howto dismantle my crowbars, and we need a forum thats tutorials only and only mods can post, as said above^^

 

[Kevski]

Bump because this thread gave me help. It would have taken quite a bit longer to figure out without this tutorial.

 

[no_steeze]

yes this is a very good thread, all c-bar nublets should grab hold of it

 

[steezy_Koolaid]

i LOVE U