Coloradoskier03
Member
I know it's a little lat for a summer setup, but what is the best way to do one? Inexpensive. I have a lot of power tools and scrap wood + pvc. I already have a rail built. Ideas? Thanks.
13712144:J_S said:Everything you need to know is here:https://www.newschoolers.com/cultforum/453/Build-A-Jib-101?page=1
but to put it in my own words, what most people do is cover it in turf, and then put plastic lattice on the run in. Here's a photo of what this might look like:
![]()
However, a good way to make use of your scrap pvc would be to cut the PVC the width of the drop in, and use it in place of the lattice. Keep in mind that you will still have turf underneath
It would look like this:
[img=]834969[/img]
Good luck!
13813931:GarFrom09 said:Would it work if I just had littice and no turf under it
13813931:GarFrom09 said:Would it work if I just had littice and no turf under it
13814480:Rparr said:mSnow. It's expensive but it's the real deal.
13814478:DIRTYBUBBLE said:Ehhh I tried that with mine at first. It sort of worked, but I had absolutely no edge control which made getting onto the rail a bitch. And I actually had a problem with getting too much speed.
13814617:GarFrom09 said:Well I was planing to use lattice just for the drop in part the jump would be turf still I don't know if that would work well
13814640:DIRTYBUBBLE said:It might work. I'm guessing you'll carry a ton of speed down the in run, but when you hit the turf you'll slow down a lot and it might jerk you forward/make you eat shit. At least that's what happened with mine.