Sugarloaf Chairlift breaks

13375036:RudyGarmisch said:
Fucking jump.
Click to expand...

A few people did, who were on the lower chairs, but a majority of the chairs are much too high to jump, and over here on the ice coast there are no soft landings to be found.
 
13375072:saracheezy said:
come on sugarloaf! happened in 2010 as well...

Could be worse here in timberline wv we had like 4+ chair lift breakdowns. didnt go backwards though...
Click to expand...
 
dude i was skiing there a couple days ago but king pine was closed for wind hold. thank god for warmer temps when everything rolls cleanly
 
Rollbacks are sketchy. Lucky they were able to stop it though and no one was killed.

I'm a lifty and on my second weekend working one of our lifts had a rollback, only 3 chairs though and they weren't loaded. But damn that's scary as shit.
 
Interested to see what happens, with the amount of safety features involved with lifts this SHOULDNT happen. We shall see
 
13375041:RudyGarmisch said:
Lets see if Rowen can embed a video:


**This post was edited on Mar 21st 2015 at 1:24:13pm
Click to expand...

Good lord that would be insane to be strapped onto one of those
 
No reason for this to happen.

Two accidents, similar, same resort, in 5 years. There will be some serious repercussions that happen.
 
Welp, after the lawsuits that come because of this Boyne will have even more financial excuses to not buy my mountain a new fucking chairlift
 
Exact same thing happened to my chair on the mountain chief at copper two years ago. They gave me lots of free tickets and paid a round trip flight from DC for another trip in exchange for the hush hush.
 
topic:CaptTurner said:
http://bangordailynews.com/2015/03/21/news/mid-maine/king-pine-chairlift-breaks-at-sugarloaf/

I wasn't skiing today, but supposedly a lift at Sugarloaf broke today and started moving backwards and a few chairs crashed to the ground as they were derailed. I'm just curious if anyone has ever experienced or witnessed something like this and what did you do?
Click to expand...

That King Pine lift is NEVER FUCKING RUNNING whenver I go to the Loaf.

Lazy ass mother fuckers with their ancient lifts but its a high end resort with nice hotels fuck man fix your busted ass lifts you pricks.

Im thinking of buying that pass next year fix your shit!

Normally I only drive that stupid far if its super early or late in the year and even when all the trails are open that shitty lift is always closed and you have to lap that lame ass fixed quad.

FUCK THIS PIECE OF SHIT ORGANIZATION FOR THEIR GARBAGE LIFTS THEY ARE ON THE SAME PASS AS LOON AND SR UNACCEPTABLE.

Everytime I go there I think they are a disgrace because of the lifts. I went there on an early powder day in Decemebr and the Super Quad wasn't running. Thanks you fucking shitcunts.
 
13375651:MCsugarcat said:
FUCK THIS PIECE OF SHIT ORGANIZATION FOR THEIR GARBAGE LIFTS THEY ARE ON THE SAME PASS AS LOON AND SR UNACCEPTABLE.
Click to expand...

Always been an SR local and it looks like it's gonna stay that way. 2 major lift malfunctions in five years. I wouldn't trust riding on any of those lifts over there.
 
13375669:PurpleDino said:
Always been an SR local and it looks like it's gonna stay that way. 2 major lift malfunctions in five years. I wouldn't trust riding on any of those lifts over there.
Click to expand...

That day I was there (and every trail was open but no Super QUad or King Pine lift off course) the main fixie was so shitty they had to load it up every other chair.

The snowfields aren't that good simply because they aren't long and you have to slam breaks after a turn or two to not hit the traverse hard.

People ski there they can fix their crappiest lifts.
 
heres another video

People are saying it went 450 feet in 30 seconds, thats as fast as a detachable lift. Between people jumping and the way the chair hits the tower at the start I'm surprised it didn't derope
 
God damn, this crazy ancients, undetchable chairlifts are hella scary! Glad that nothing more happened. What was the reason for the breakdown?
 
13375891:-InfamousMax- said:
God damn, this crazy ancients, undetchable chairlifts are hella scary! Glad that nothing more happened. What was the reason for the breakdown?
Click to expand...

No official word yet on the cause of the breakdown. All lifts are required to have anti rollback brakes and failsafes, crazy to think of what could have malfunctioned to cause this.
 
13375891:-InfamousMax- said:
God damn, this crazy ancients, undetchable chairlifts are hella scary! Glad that nothing more happened. What was the reason for the breakdown?
Click to expand...

sugarloafs lifts are pretty sketchy, if you read the report from the spillway accident they were trying to fix the pulley alignment with something that was never meant to do so (while the lift was loaded). Lifts are required to have like 3-4 fail-safes to prevent this so something obviously went wrong.
 
13375972:w_skier said:
sugarloafs lifts are pretty sketchy, if you read the report from the spillway accident they were trying to fix the pulley alignment with something that was never meant to do so (while the lift was loaded). Lifts are required to have like 3-4 fail-safes to prevent this so something obviously went wrong.
Click to expand...

ima newb lift operator, so correct me if i am wrong, but why does some maitainence occur during operational hours? Is it due to time? It seems it would be a lot better/safer to do it when the publics not there, or just a simply shut it down for a few.
 
13376046:DeebieSkeebies said:
ima newb lift operator, so correct me if i am wrong, but why does some maitainence occur during operational hours? Is it due to time? It seems it would be a lot better/safer to do it when the publics not there, or just a simply shut it down for a few.
Click to expand...

Im not a lift operator at all, just took an interest in lifts when I was a kid. In that case it was a problem that had just come up, the lift was on hold, then after they opened it the tower that deroped was making a weird noise so they sent someone up to check it out, to find the sheaves were out of line. It was stopped and started it a few times while the problem was adjusted and then the cable slipped (and again wasn't caught by fail-safes). Sketchiest part was that the lift ran another 40 feet afterwords dragging people under the chairs.

the whole report is in here:https://www1.maine.gov/pfr/professi...nal Report Sugarloaf Spillway East Report.pdf
 
13376046:DeebieSkeebies said:
ima newb lift operator, so correct me if i am wrong, but why does some maitainence occur during operational hours? Is it due to time? It seems it would be a lot better/safer to do it when the publics not there, or just a simply shut it down for a few.
Click to expand...

its far from ideal but sometimes it has to be done. lots of reasons for it, not enough daylight after operating hours to get a big project done, something needs attention immediately even if people are on the lift, unable to travel to the lift before opening to public due to avy control etc.
 
13376079:I_Bohrmann said:
most of the injuries were from people who jumped
Click to expand...

I should've prefaced that statement with "something I always joke around on the lift about is..."

If the lift was going backwards at like 5mph I obviously wouldn't jump. From what I saw in the videos it wasn't going that fast (or was it?) But if you were nuking backwards on a lift you don't wanna keep riding it haha.
 
One thing to note about this, news like this isn't just bad for Sugarloaf, it's bad for the entire industry. People who have no clue how many systems have to fail for this to happen will now second guess going to any resort. On top of that, this happened at a fairly large resort, people with think if it could happen here, it could happen anywhere. It's a pretty shitty situation for everyone honestly.

Case in point, I was at Magic Mountain running a demo today. I heard several times "I hope the lifts don't go backwards." Most of the people saying this looked like pretty experienced skiers, skiers who have been on lifts hundreds of times without a problem. Imagine what the average person or people who only ski once or twice a year are thinking...
 
13376061:YoungDaph said:
its far from ideal but sometimes it has to be done. lots of reasons for it, not enough daylight after operating hours to get a big project done, something needs attention immediately even if people are on the lift, unable to travel to the lift before opening to public due to avy control etc.
Click to expand...

thanks for the clarification, I guess you folks just gotta do what you gotta do sometimes.
 
Just going to go ahead and say this has not the best weekend I've had working in the marketing department at Sugarloaf.
 
13376064:pussyfooter said:
Rule #1 if a chairlift starts to go backwards, jump.
Click to expand...

13376079:I_Bohrmann said:
most of the injuries were from people who jumped
Click to expand...

I think I'd rather break a leg from jumping than being throw 30 feet from being whipped around the bullwheel and dying.
 
If eheath jumped from the lift the whole mountain would feel it. Better to stay on to prevent a massacre buddy
 
this just in, it was a gearbox malfunction. for those who have no idea what that means, the basic construction of a lift goes electric motor->high speed shaft->gearbox->low speed shaft->bullwheel

When the gearbox fails it can decouple the lift from the primary anti-rollback brake which is connected to the bullwheel shaft. The emergency brakes which were applied by the lift op once the rollback started actually attach to the bullwheel itself which was how they were able to get the lift stopped. Mechanics who perform startups every morning are required by law to do daily inspections of the gearbox, the morning of and the day prior everything passed. It was a freak mechanical failure and I'm sure there will be tons of investigations and every lift of the same make in the country will probably have to undergo extensive testing.
 
13376282:YoungDaph said:
this just in, it was a gearbox malfunction. for those who have no idea what that means, the basic construction of a lift goes electric motor->high speed shaft->gearbox->low speed shaft->bullwheel

When the gearbox fails it can decouple the lift from the primary anti-rollback brake which is connected to the bullwheel shaft. The emergency brakes which were applied by the lift op once the rollback started actually attach to the bullwheel itself which was how they were able to get the lift stopped. Mechanics who perform startups every morning are required by law to do daily inspections of the gearbox, the morning of and the day prior everything passed. It was a freak mechanical failure and I'm sure there will be tons of investigations and every lift of the same make in the country will probably have to undergo extensive testing.
Click to expand...

So was there like any sign that maybe something like this could have happened? Or was it something that couldn't have been detected in a daily inspection?

Just wondering because theres some hate about sugarloaf and their lifts in this thread. Just curious if it was neglect from the resort or if it really was unpredictable.
 
13376288:Mingg said:
So was there like any sign that maybe something like this could have happened? Or was it something that couldn't have been detected in a daily inspection?

Just wondering because theres some hate about sugarloaf and their lifts in this thread. Just curious if it was neglect from the resort or if it really was unpredictable.
Click to expand...

no, its not something that you can really predict due to daily inspections. most gearboxes look like this:

10609468_10203836018412239_2455076179903142630_n.jpg


sorry for the shitty photo, its the dark grey box attached to all the rigging on the left, this was from us pulling it out to inspect the inner components this summer on one of our fixed grips. As you can tell, its very hard to see the inside of it. We filter, sample the oil and perform vibration tests yearly but when you're doing a basic morning lift startup in the morning all you can really check for is oil levels and leaking.
 
13376317:pussyfooter said:
Really liking the lift maitinence insight in this thread, very interesting.
Click to expand...

anytime! They're fascinating machines that most people don't know anything about, I love geeking out about them
 
13376318:YoungDaph said:
anytime! They're fascinating machines that most people don't know anything about, I love geeking out about them
Click to expand...

was stoked to see you in this thread. our mechanics are the best for sure.

In the case of Sugarloaf, glad no one was seriously injured (or died) Rollbacks are way terrifying, especially on a detachable lift, glad they were able to get it stopped.
 
13376282:YoungDaph said:
this just in, it was a gearbox malfunction. for those who have no idea what that means, the basic construction of a lift goes electric motor->high speed shaft->gearbox->low speed shaft->bullwheel

When the gearbox fails it can decouple the lift from the primary anti-rollback brake which is connected to the bullwheel shaft. The emergency brakes which were applied by the lift op once the rollback started actually attach to the bullwheel itself which was how they were able to get the lift stopped. Mechanics who perform startups every morning are required by law to do daily inspections of the gearbox, the morning of and the day prior everything passed. It was a freak mechanical failure and I'm sure there will be tons of investigations and every lift of the same make in the country will probably have to undergo extensive testing.
Click to expand...

thanks for the info again, as always. hopefully the general non-skiing public understands that these kinda scenarios are hard to prevent, and just shit simply happens sometimes even with the precautions/measures that are took.
 
Three things as a lift operator I really wanna know. How old was this lift? Why was the checking of the gear box oil contracted(are they not capable of checking themselves?)? Why was the date of last oil check convieniently the day before the accident? (not impossible but just seems suspicious)?
 
From some of the pics I have seen the line looked loaded as fuck. The bullwheel brake did its job but I'm interested if there was a delay in the rollback dog or something else electrical(the most fucked with part of a lift). Its gonna take a while to stop all that mass but downhill side looked sketchy and felt like that the bullwheel brake should have stopped sooner or crept the lift to a slow.
 
13376082:pussyfooter said:
I should've prefaced that statement with "something I always joke around on the lift about is..."

If the lift was going backwards at like 5mph I obviously wouldn't jump. From what I saw in the videos it wasn't going that fast (or was it?) But if you were nuking backwards on a lift you don't wanna keep riding it haha.
Click to expand...

It was cooking, the videos seen were after the lift had slowed, during the fastest period of the rollback jumping would be heavily advised in my opinion
 
13376079:I_Bohrmann said:
most of the injuries were from people who jumped
Click to expand...

I'm not sure that's true. Either way, once the lift got below 15 ft I sure as fuck would jump. I'm not going to speculate or tell anyone what to do but I would definitely rather take my chances jumping than getting whipped around the bullwheel. A lot of the chairs were banged up bad after going through there.

Regardless it's extremely sad for Sugarloaf. I love the mountain, grew up skiing/taking family vacations there and will continue to go there for a very long time, but it's just bad for the business. Gotta be thankful it wasn't worse but I have to imagine it's going to tarnish their name for a very long time. Luckily I think most people are pretty loyal to the mountain but I'm sure it'll hurt.

I can only imagine the hellish week Jamie, Ethan and all the other staff have had there. Props to all the patrollers/employees that helped in the evac.
 
You must log in or register to reply here.
Back
Top