Small ski business

[sneek]

So I build skis on a really small scale, and this is just some advertising. Shitty advertising, but advertising. So, check it out on instagram @sneekskis

Thanks yo

 

[Spagett+]

Like how small? Like skis for ants?

 

[sneek]

Like how small? Like skis for ants?

ahahaha good joke but just to clear it up that meant low volume.

 

[Anguz_li]

So I build skis on a really small scale, and this is just some advertising. Shitty advertising, but advertising. So, check it out on instagram @sneekskis

Thanks yo

I am your 100th follower I demand a free set of skis, boots a follow back! xD

 

[CameraWiz]

Followed. Where do you sell said skis?

 

[sneek]

Followed. Where do you sell said skis?

Because I don't have a website set up quite yet I just do it through DMs basically.

 

[grilled_steeze]

how much does each pair cost (approximately)

 

[Ranch]

You should get going on that website

 

[sneek]

You should get going on that website

Yeah, been working on it for a bit, it's just hard to get a full product line together, that's all.

 

[Steezy_IN_KC]

Yeah, been working on it for a bit, it's just hard to get a full product line together, that's all.

PM me if you need some assistance with a website. I have a the skills that you desire to create a bitchin website.

 

[snowfinder]

Few questions for you.

1. What are the cores made out of?

2. How are you pressing them?

3. Do you have any kind of waiver or insurance?

4. How many pairs have you made so far?

 

[FastSpeed]

You should make a twin tip with metal. I know it sounds stupid but I like dicking around throwing 180s off main trail jumps but I also want a damp and stable ski. the blizzard peacemaker is the only real ski like this

 

[TheBigApple]

Nice they look good keep it up!

 

[lickmyballs]

So I build skis on a really small scale, and this is just some advertising. Shitty advertising, but advertising. So, check it out on instagram @sneekskis

Thanks yo

Do you have some sweet buttery skis?

 

[sneek]

Do you have some sweet buttery skis?

But of course! Basswood-ash cores mean lightweight and soft. Also full rocker to get those #butterz around. Check the insta. You'll see.

 

[sneek]

Few questions for you.

1. What are the cores made out of?

2. How are you pressing them?

3. Do you have any kind of waiver or insurance?

4. How many pairs have you made so far?

1. Basswood ash or maple aspen, still experimenting though.

2. Pneumatic press.

3. I do not.

4. Not entirely sure.

 

[Bogs]

You should make a twin tip with metal. I know it sounds stupid but I like dicking around throwing 180s off main trail jumps but I also want a damp and stable ski. the blizzard peacemaker is the only real ski like this

The Peacemaker doesn't have metal in it, dawg

 

[zakattack66]

4. Not entirely sure.

do you have an estimate?

 

[Rennis_Deynolds]

ahahaha good joke but just to clear it up that meant low volume

your loss

 

[lickmyballs]

So I build skis on a really small scale, and this is just some advertising. Shitty advertising, but advertising. So, check it out on instagram @sneekskis

Thanks yo

Hey man, I'm really interested in your company. Check your messages on hear!

 

[sneek]

do you have an estimate?

I've been making prototypes for years now, and I haven't made tons of pairs but I know the process very well and make quality, durable skis.

 

[CameraWiz]

How much do they cost?

 

[sneek]

How much do they cost?

450 with feedback at the end of a season.

 

[270on420out]

Thickness of edgess and material?

 

[sneek]

Thickness of edgess and material?

pretty standard 1.8mm. Planning to move to 2.5mm edge though.

 

[FastSpeed]

The Peacemaker doesn't have metal in it, dawg

I know buts its the closest thing to a stiff twin

 

[whistles]

Heading out to slc from colorado for the next week. If you have anything laying around 115mm+ underfoot with a lot of rocker in the $250 range I would be stoked on some homemade powder sticks

 

[sneek]

Heading out to slc from colorado for the next week. If you have anything laying around 115mm+ underfoot with a lot of rocker in the $250 range I would be stoked on some homemade powder sticks

Depends on the length you're looking for.

 

[whistles]

Preferably 185+

 

[sneek]

Preferably 185+

Ha well I'm a short dude so I can't do anything for ya there. I have a pair of 123 underfoot that messed up in the press that I would part with for cheap but they're 168s so that makes it difficult.

 

[whistles]

168s that are 123 underfoot? Im tempted

 

[Deepskier]

For my highschool personal project I was going to start making skis any advice?

 

[Deepskier]

And where do you find your materials?

 

[sneek]

168s that are 123 underfoot? Im tempted

That was the general idea. Short and fat. Probably pretty playful. I've never even mounted them so

 

[sneek]

For my highschool personal project I was going to start making skis any advice?

And where do you find your materials?

Id be glad to help you out, that's why I started. Just DM me on instagram @max_bama

 

[sgg.23]

excited to see where this is headed!

 

[Deforestation]

168s that are 123 underfoot? Im tempted

for future reference, you don't have to save pictures to your comp and them choose the file to post. just find a pic, click it to get it's url and put it like this