SAUCER BOY NEEDS HELP ADJUSTING SKI BLADES

joelski

joelski

Active member
my friend just gave me some kneissil piper ski blades with kneissil bindings and i have no clue how to adjust them to my boot. the bindings are too tight! I have tried pulling and pushing everytghing to no avail. there are markings on the front and back binding that have numbers and letters designating where the binding could be adjustible i just havent been able to move the metal loops that go around the boot to the different possitions. THESE ARE SKI BLADE SPECIFIC NON RELEASABLE BINDINGS I KNOW HOW TO ADJUST NORMALL SKI BINDINGS

i will post some pictures up asap
 
you gotta pull the circular tab on the front all the way out, and then push the metal part down and slide it forward or backwards. the slider thing is probably pretty stuck so you might need a flathead screwdriver and even a hammer to get it moving.
 
something could be stuck there should be tabs that slide out releasing the metal bars an making them adjustable.. i ended up cutting my bindings an remounting them as they did not adjust big enough to my new boot good luck saucer boy !!!
 
13743432:danbrown said:
you gotta pull the circular tab on the front all the way out, and then push the metal part down and slide it forward or backwards. the slider thing is probably pretty stuck so you might need a flathead screwdriver and even a hammer to get it moving.
Click to expand...

thanks dan, i saw a video that said to do that however with these bindings the circular tab is imobile its part of the same plastic that makes up the rest of the toe peice and the same is true with the tab in the heal
 
Just take the bindings off and screw your boot directly to the snow blade. It will reduce the stack height big time.

Saucer Boy is more than a halloween costume. Its a lifestyle choice. Time to commit.
 
You must log in or register to reply here.
Back
Top