S/Pro alpha 130 repair thoughts?

mikem

mikem

Member
Cuff alignment part just decided to yeet itself somewhere... I've emailed Salomon for a spare part but you know sure as shit its going to take 30 days. Any ideas?

1067540.jpeg
 
14521901:officechair said:
Bolt from Home Depot with smaller washers in the hole and and big one for the outside?
Click to expand...

Or get a bolt and some acrylic, polycarbonate, or similar scrap (ask an employee). Cut a small insert then drill the hole offset. Do the same with a larger piece and file some grooves to fit the teeth.
 
Yaaa, would have to find a washer with similar grooves I think, else the cuff would just be super flexy on one side. Here is better pic of how its set up.

1067545.jpeg
 
Also I think the atomic Hawks cuff alignment part is the same from looking at it. but can't find online in stock anywhere
 
14521907:mikem said:
Also I think the atomic Hawks cuff alignment part is the same from looking at it. but can't find online in stock anywhere
Click to expand...

If you can confirm that they are, I have a broken set of Hawks ultras that I could pull the part off of and mail to you op.
 
14521938:mikem said:
https://www.skiequipmentuk.co.uk/product/brands/atomic/atomic-ski-and-ski-boot-spares/atomic-ski-boot-progressive-cuff-alignment-kit/

Does yours look like this? I'll call Salomon customer support and see if i can confirm. If so that would be
Click to expand...

Off the top of my head that looks correct. Not near my boots right now though.

[tag=134699]@onenerdykid[/tag] are they interchangeable?
 
14521959:mikem said:
No im missing one, these photos are from the other one i pulled off.
Click to expand...

Got it...Reading comprehension is not so good today.

Do you have a decent shop around? They may have some boot parts in a bin or drawer they'd let you look through.
 
14521961:Non_State_Actor said:
Got it...Reading comprehension is not so good today.

Do you have a decent shop around? They may have some boot parts in a bin or drawer they'd let you look through.
Click to expand...

Got some buddies that work at local shops around here, one of em said they might have a part so going to drive down to em to see.

Called salomon cs to ask and the lady hung up on me the second I asked if it was the same part as atomic so idk.
 
14521963:mikem said:
Got some buddies that work at local shops around here, one of em said they might have a part so going to drive down to em to see.

Called salomon cs to ask and the lady hung up on me the second I asked if it was the same part as atomic so idk.
Click to expand...

Try to contact the local Salomon rep, in my experience the reps are super helpful. The Cs for Salomon has done the same thing for a few warranties at my shop.
 
Yo, so I went to a shop where my friends work, they didn't have a spare part so we just washer and screwed it. It was pretty good, didint have an exact match washer but boot was def good to go.

On my way home i stopped by another shop because i knew they sold atomics. Guy checked it out, he said the atomic part is slightly bigger on the inner hole. He did tho end up having a spare salomon and slapped in on there.

So we all good to go again
 
14521946:Profahoben_212 said:
Off the top of my head that looks correct. Not near my boots right now though.

[tag=134699]@onenerdykid[/tag] are they interchangeable?
Click to expand...

Yes - Salomon is using our Hawx cuff alignment pieces for their S/Pro Alpha & Supra boots.

These parts generally are not available online in North America, so you need to check in with any Atomic or Salomon dealer.
 
You must log in or register to reply here.
Back
Top