Rossignol 150's???

Q

quattro179

Member
Do these exist? They must.. I saw a kid i know ridin them and they look exactly like the race stock heel but the toe piece that was kinda similar to the 916s.
 
did the toepiece look like this?

DSCN2801.jpg


if so, its a toepiece rossi made, its just as good if not better than the new one. thall uses these rather than the newer ones.
 
yeah the bindingd above are fks 120s but i'm sure they made 15 and 18 DIN versions. i rock these for park and theyre the best bindings ive ever used.
 
I have a pair of the 14 din varient of that binding. Its a toe made by the now defunct binding company Geze. It has an upward release and the FKS Heel. It mounts with a 3 hole pattern in the toe and the standard 4 hole rossi mount in the back. More plastic in the toe, but this makes for a lighter weight. I have them on mp publics for park and cant think of a more indestructable binding for the weight. I like them more than the 916's on my Bacons.
 
^ i duno about your bindings, but the yellow ones i posted are mine, and they have the 4 screw toe. same alignment as newer ones too
 
No way dude, if its that toe, than it is a 3 hole pattern. One under the din setting, and the 2 that are visible. You drill the 3 holes, put the screw in the front hole. It is a special screw which has a tab on it. You put the toe over this screw, slide it forward, and then drill the back 2 screws in.

If you dont believe me, I can go into work tommorrow and take a picture of the jig...but as arech for 3 years, I avent seen one of the geze style toes that wasnt mounted with a 3 hole pattern.
 
yo man chill, ive had the 3 screw toepiece, and i know that the ones i have are the 4 screw. i dont know if they are the same toepiece as yours, although obviously not because of the different amount of screws.
 
Im not pissed or anything. Im just interested now, because Ive never seen a 4 hole Geze style toe...

Where are the front screws? Are there just 2 of the achor screws under the toe that you cant see?
 
theres the 2 youcan see, closer to the back of the ski, then theres 2 in those black rubber thingies. also the screw pattern is exactly the same as the one p12s and fks
 
Ah, ok. I havent seen those yet...good to know.

The rossi jog we have for the fks just shows pictures of the 2 toes...that, and the current one. It tells us to use a 3 hole for the style toelike that, and the 4 hole for the new toe and almost every other rossi toe around. I was going by that and what i had mounted in the past.
 
You must log in or register to reply here.
Back
Top