Rossi FKS question

Krush

Active member
i was wondering if it was possible to adjust the binding backwards or forwards after it was drilled into some skis. judging by this pic it doesnt look like u can but i hope im wrong

155fks.jpg
 
yes, the rods that connect the plate and the heel screw and unscrew on each side. you can usually just do it with your fingers.
 
no you cant adjust them, so dont buy. they are shitty bindings , you will most likely blow out you knees b/c they dont release, you should consider something else
 
somewhat true. if you are only needing to fit a boot thats a few mm bigger or smaller, you can use those rods to adjust to accommodate that boot and keep the correct forward pressure. they aren't like a salomon or look binding where there's a pretty large range of sizes it can fit though.
 
Someone who obviously has no knowledge of binding tech and forward pressure shouldn't be on them though. If they have to ask, they aren't ready for them.
 
i would buy the 15din ones if i bought them. the 18 is def to much for me. the reason i really want some tough binding is cause i broke my marker free 12's like 8 times last year. these ones

12.0.jpg
 
yeah you need something besides marker.....how much do you weigh/ how tall are you, you might even be fine with fks120, or even some p12/p14
 
sounds just like me except im an inch taller than you and 5 lbs less. i went with the 120. theyre cheaper, significantly lighter, and safer. the 155 and 185 dont have vertical release so just a bit more risking of your acl.
 
Thats a horrible deal! I paid 250 for mine! Yur completely getting ripped off on those man...

(*note sarcasm. That is a good deal.)
 
Back
Top