Removing p12 heel piece

you see the small screw that determines the heel pieces location used to adjust the binding duing mounting? Should be on the back, bottom, center. Turn it so that the heel piece moves further and further back. Eventually, it will release from the track and you can slide it off. The binding track is then what is secured to the actual ski, and you can just unscrew it and your done.

make sense?
 
ya makes total sense but when i turn the heel piece screw all the way back the part stops and wont turn anymore and the binding wont slide anymore back
 
make sure it will forsure not turn anymore, then try and give it a little push. Should pop off the track
 
That happened to me too, it just stopped, wouldn't go forward or backwards. I threw my ski against the concrete a few times and it came off
 
unscrew completely till u keep unscrewing and it isnt moving anymore. than pull the heelpiece towards the back of the ski and it will pop off. altho i think iggy said that :)
 
You must log in or register to reply here.
Back
Top