Rebuilding my rail

[BkCountrySkrMO2]

i have a 8.5 ft. flat rail with pvc on the top, the kid who gave it to me used nails (not screws) to attach the pvc to the wooden base. Now the pvc is cracked and i want to replace it, how should i go about taking off the pvc attached with nails through the top? I though about just breaking off the pvc piece by piece

 

[Greenish]

brake it off, then get a new one and drill holed and use screws

 

[my_ar5_steeze]

just break it off, n for the new one, drill a hole n screw it

 

[BFINO13]

yeah just get brand new pvc

 

[Enrique]

Hola, I am looking for work so i can support my family. I will fix it for you for 5 dollars

 

[Oswaldo]

heloo, i fix things, i am good it, hire I

 

[Jwenz]

well if the pvc is broken get new pvc and brek old one and pre drill a whole then screw threw

 

[TheProfitSkier]

i recomend taking all the pvc off and then putting the two wooden structures end to end and putting a new material on top

 

[awsomecoolguy]

wtf ? are you like an illegal mexican imigrant looking for work on a ski web site

 

[MidwestJibba]

you can attach the new stuff with liquid nails for polyurethane

 

[BkCountrySkrMO2]

why new kind of materials do you think? also, i have 2 of these 8.5 ft. flat rails, they are identical (exept for the pvc crack) should i just link them together and make a 17 ft. flat rail?

 

[jibmaster_josh]

i didnt pre-drill holes, i just screwed up threw the wood into the pvc. works fine. i made a 10ft flat rail and a 10ft c and i used the same precedure on both and they seem to work.