reactors

lineordie

lineordie

Member
im not saying theyre broken, or complaining about anything, but i searched and didnt find anything about this

when i try to tighten my reactors, all i hear is a clicking noise, and they wont tighten any, does anyone else have this probelm? if so, how did you fix it?

 
well if your talking about the 4 screws in the center that screw into the ski you might be tightening them way too much. the clicking could be you trying to screw them deeper than they will go in.

----------------------------------------
-Jonathan
Jibij Pro Shop
'jibij is the dope steeze. go there for all your core ski needs'
 
maybe u striped the screw or the whole...take it to the shop and have them check it out

---------------------------------------
-SKI 4 LIFE-
 
how could there be a problem with mounting them yourself? you screw in 4 little screws. and all you have to do is adjust the dins yourself by turning that screw. is that problem on both of the bindings? if it's only on one, i would say its broken. if it's on both, you aren't doing something right.

 
well obviously you have no idea how reactors work. if you mount them yourself you will break them. you dont know how to set your boot right and check it to see if its too tight or too loose, if its center and stuff like that. plus..DIN for reactors isnt the same chart as every other ski company, its different.

----------------------------------------
-Jonathan
Jibij Pro Shop
'jibij is the dope steeze. go there for all your core ski needs'
 
You must log in or register to reply here.
Back
Top