Park builders, ASSEMBLE!

Toaster-Tony

Toaster-Tony

Active member
So the small hill I ski at is deciding to expand the terrain park. This is going to be sweet, but I don't know too much about the actual building of new features. I have some friends who have access to a shop and are pretty good welders, I just need material now.

I'm wondering where do you guys get your material (metal, box topsheet, skirting) and how much you usually spend. We're looking at picking up a few new features so whatever money we save goes right back into more features.
 
All three of those come from different places. A lot of times it has to do with what the ski resort already uses for vendors. Skirting is just 1/2 cdx ply. For steel I'm sure your mountain has someone they already order from. You can often get other departments scrap steel. Plastic is going to be the most expensive material. Usually around $140 for a 1/2 inch sheet. Sometimes you can find used sheets from hockey rinks or other places.
 
That's the thing.. We've never really had a consistent vender that we go through to get material. We had a few features donated, some were made by metal we just found laying around and welded up, and I think we bought a couple that were already built.

I'll have to hit up the scrap yard this weekend though to see what I can find.
 
To add to this you will need to grind a shit ton of rust off so get a lot of flapper disks and a grinder
 
Yup lots of grinding. They make stuff that is better then flap discs for taking off rust. Those get clogged up pretty quick. They have some for the big grinders that will work 10 times faster. It's just tiring holding a big grinder for a whole day.

See what vendors other departments use. They have to buy steel from somewhere. Plastic you will have to source yourself though.
 
Thanks for the help guys, +k. I think I might have just lucked out and scored a deal on scrap through a nearby railroad tie gang's vender. I'm keeping my fingers crossed that this comes through.
 
Regardless of where you buy the supplies you'll save a ton of money building things in house.

If you don't have anything lying around steel isn't that unreasonably priced. You can get it delivered generally unless the mountain is stupidly far from the place.

You can get half inch ply anywhere so that's not a problem.

If you build boxes you might be able to find a place near you. If not you can buy material online but you'll have to use freight shipping if you grab anything over 2'x4' sheets generally.

What are you planning to build? Post some pictures when it's done?
 
This.

Some of the best features we've made are made out of old snowmaking pipe. It's a bitch to grind down, but once it's done they make awesome features.
 
I hate you all with your snowmaking pipe. Seriously jealous though. Tube rails are so much fun and if you have a ton of that for free you're set. If we add any snowmaking next year I'm going to hope there's some extra I can lay claim to. I'd love a nice 30' tube down rail.
 
You're gonna hate us more when I tell you we just took down a lift on our bunny hill...over 100' of lift tower tube.
 
images


That's sick though. I'm hoping at some point I get lucky enough to have some lift tower status tubing to play with. Build a nice fatty donkey or something.

Got any plans on what you're building with it yet?
 
So far, only plans are to put like 4 or 5ft legs on one and put a wall ride down one side. Maybe an a-frame or a dfd. Otherwise we're going for connectables so we can whatever we want with them.
 
Actually, I was planning on building a 30 ft tube rail. I'm waiting on a family friend to see if he can score a 5 in diameter pipe. I would just need to have my friend weld up the three 10 ft parts together smoothly which shouldn't be a problem.

I was also thinking of a Flat Down rail that's raised a ways off the ground. Kinda like a mini version of the red one at Breck last year.
 
Mountain just replaced their entire main water line, so we got pipe for days. Don't think we are using much of it this year since we almost have every type of rail in tube form already. Plus we got an old lift tower out of our boneyard, which will be fun.
 
Idk why .....but when the title "Park builders, ASSEMBLE!" made me think OP was Lion-O from the original thundercats intro calling on the other Thundercats, or in this case park builders.

/images/flash_video_placeholder.png
 
Where are you located? Today we threw away 6 4'x8' sheets of 1/2' plastic. The edges are all cracked out but there is a good 3 1/2 feet in the center that is fine on every sheet.
 
It would probably be real expensive to ship them that far with traditional methods. I'm in Tahoe. Unfortunately I don't think it would be worth it.
 
I miss having a boneyard to pick from. If you feel generous during the holiday season feel free to send me some of that pipe via pm or email.

Maybe a Christmas card in the mail with 40-50 feet of tubing. I'd give you +100000 karma
 
If you are down to do a ton of grinding and welding you can use pretty shit steel. I just finished making this rail yesterday from pipe that was going to be thrown away because they said it was too destroyed to be usable.

View attachment 670425

The steel came from a wind fence that got hit by a cat. There was no section that was straight for more then 3 or 4 feet. Its good practice welding all the sections together. Was even able to use some of the really bent sections to make the first section bend from flat to down.

 
You must log in or register to reply here.
Back
Top