Need tuning help

[Valind]

How would I get a one degree base edge and one and an half degree side edge.

 

[mnjib]

get a file guide or go ask a shop to do it. why do you want that(if you are doing it to your park skis?)

 

[Valind]

No, there not for my park skis. There for my Seth's

 

[SnowRidgeParks]

yea either pay a shop to do it or find/buy some file guides

 

[Justo8484]

where do you ski? i have my seths at 2 degrees base and 1 degree side, and that has worked well for me. they still carve well on groomers, but arent constantly hooking up in choppier terrain.

 

[Valind]

Nice, I might try that.

 

[KRAMPUSNTROLLZ]

i would have the shop do it i know i would screw it up if i tried that with my skis

 

[djty111]

you need a guide that would cost like 25 for a set of 3 diffrent degrees...or just take them to a shop with a ceremic tuneing machine and ask for your needed degrees...(go to a race shop)

 

[KeithB.]

I have seen a guide that will tune both base and side edges, but I don't remember who makes it. You may want to check out Sun Valley Tools. I thought Seths came with a 1 degree base and 2 degree side, but I could be wrong...make em how you want though. A 2 degree base would be less grabby in the chop.

 

[BMskier]

the degrees doesnt matter. the bigger the degree the longer it takes to get on edge. i haave been using a 2 my whole life and its perfectly fine and then us a .75 for the base. get the beast base bevel its the best.