Need help on building rail!!!!

[kalum.ko]

i need help on building a pvc rail if some1 has designs and plans could you please post them! I doesn't matter how long it is i just need plan i can use for a refference.

thanks

 

[ontwosticks]

just look in the pic thread you'll see tons of pvc rails and you can figure it out form there.

 

[Lineskiah11]

https://www.newschoolers.com/web/forums/readthread/thread_id/353694/

theres some good examples that should help you out...

 

[kalum.ko]

thx but. all i need to know is haw to drill the pvc to the wood.

 

[Lineskiah11]

either drill up through the bottom of the wood into the pvc or do what i usually do and drill a larger hole in the top of the pvc so the screw can fit inside and then screw the pvc in with the screw going out through the other side into the wood.

 

[DaLiNeRiDEr21]

my thread help someone out SEEEEEEEEE

 

[tBatt]

drill up from the bottom of the wood into the pvc. it may take a few tries for the screw to catch the pvc but it works. you might want to try using a tiny drill bit to pre-drill holes or a vice to clamp it down