skiatgore69 Active member Oct 29, 2006 #1 does anyone know how nailing through pvc works? is it easy or does it crack it?
fillup Active member Oct 29, 2006 #3 wil crack you get a drill and drill bit and drill all the way through then make the one on top big enoth for the head of the screw to go through then screw in simple
wil crack you get a drill and drill bit and drill all the way through then make the one on top big enoth for the head of the screw to go through then screw in simple
drshmee Member Oct 30, 2006 #4 or you can drill though the tube then counter sink on the top for more stability, make sure its counter sunk really well
or you can drill though the tube then counter sink on the top for more stability, make sure its counter sunk really well
SkiMN Active member Oct 30, 2006 #5 If nails are your only option, take a blowtorch and heat the nail up, then push it through with a pliers. It might take a few tried but a cold nail hammered in will proly crack it. A screw is your best bet though.
If nails are your only option, take a blowtorch and heat the nail up, then push it through with a pliers. It might take a few tried but a cold nail hammered in will proly crack it. A screw is your best bet though.
PeteyG Active member Nov 4, 2006 #6 does screwing through the bottom with nothing else any good or will it crack?
chapz Active member Nov 4, 2006 #7 https://www.newschoolers.com/web/forums/readthread/thread_id/246614/ do this
