BearsOnKetamine
Member
On ankillas story he talked about how his bindings keep ripping out (he’s had 5 bindings rip out). What in the constitution make misfits do this but most skis don’t?
Misfit skis drama
- Thread starter BearsOnKetamine
- Start date
steez_apprentice
Member
idk but that live was funny as fuck
Christian_Bale
Active member
Like I'm going to trust anything ankilla says
Farmville420
Active member
I've never ripped an edge out of my ski but tons of rail skiers have. Skis break, shit happens, I know kids who throw down on gen 1 misfits with no issues. It's a skier-to-skier thing more than anything. Some kids throw weight differently and dig their edges harder than others etc so I don't actually think it's a misfit problem, I also don't think ankilla is a bad skier or doing something wrong, maybe just a coincidence or a bunk pair
BigPurpleSkiSuit
Active member
I don't give a shit about ankilla, but since this thread is already made, I'll add a little chirp from Sage's latest video @5:43 in
snowfinder
Active member
Idk man he should be an organe name.
14577199:Christian_Bale said:
BLandz
Active member
For anybody considering Chris and Bandana homie being in the right in this situation.
1st: They said they heat the epoxy for when they mount, which is terrible, especially with open holes in the ski. Epoxy manufacturers are actually engineers and they do not recommend doing this.
2nd: There is only epoxy at the very bottom of the holes. The main purpose of using it is to seal from water, which it cannot do if it is only at the bottom of the holes. They tried to argue that they used enough epoxy but the topsheet was completely bare. Add this with the fact that they literally heated it up, and also the possibility of using the shitty 5 min curing shit (idk about that tho), you have a recipe for disaster.
This is what my topsheet looks like after taking bindings off, for reference
As you can see there is a volcano of epoxy on the topsheet. Someone might have a pic, but chris’ skis do not have any, except for at the bottom of the hole. Him and his homies are super outta pocket for trying to diss them on live, they seemed like stoney blazed dipshits that had zero idea what they’re talking about. I seriously question their ability to mount skis
1st: They said they heat the epoxy for when they mount, which is terrible, especially with open holes in the ski. Epoxy manufacturers are actually engineers and they do not recommend doing this.
2nd: There is only epoxy at the very bottom of the holes. The main purpose of using it is to seal from water, which it cannot do if it is only at the bottom of the holes. They tried to argue that they used enough epoxy but the topsheet was completely bare. Add this with the fact that they literally heated it up, and also the possibility of using the shitty 5 min curing shit (idk about that tho), you have a recipe for disaster.
This is what my topsheet looks like after taking bindings off, for reference
As you can see there is a volcano of epoxy on the topsheet. Someone might have a pic, but chris’ skis do not have any, except for at the bottom of the hole. Him and his homies are super outta pocket for trying to diss them on live, they seemed like stoney blazed dipshits that had zero idea what they’re talking about. I seriously question their ability to mount skis
BLandz
Active member
S/o to Misfit, I fw them hard, was gonna cop a pair this year but passed up on it because I got a crazy deal on old V’s, im hyped to try them out one day tho, they look really fun. If you werent in the live, I feel sorry for you. That was the funniest shit i’ve seen in months. Reid said the N word like 7 times and ankilla tried to stop him but he wouldn’t
(Kidding)
**This post was edited on Jan 3rd 2024 at 6:06:16pm
(Kidding)
**This post was edited on Jan 3rd 2024 at 6:06:16pm
partyandBS
Active member
14577220:BLandz said:
i have ana blocked on ig so i missed it but i imagine they tore the ski up, felt entitled to a free pair like they felt entitled to an orange name and when they didn’t get it, they went on a rant on ig. was i close??
also the date range of when you were an orange name had me geekin lmao
steez_apprentice
Member
14577254:partyandBS said:
His binding came clean out of the ski multiple times apparently and after switching bindings on a new pair it ripped again (5 total times I guess)
Christian_Bale
Active member
14577206:snowfinder said:
yellow name
MisfitSkis
Member
Very entertaining indeed. To throw some points out there without making this a penis measuring contest against ankilla; our durability is on par with most brands, we use a poplar and beech core with the standard 10-11mm wood thickness in the center and it tapers out towards the ends, we try to have the beech under where the binding screws go so that it’s a harder wood you are drilling into. We use a heavier fiberglass underfoot to thicken and stiffen the middle third of the ski platform. We come out of a factory that produces other huge name skis (won’t say specifics, they might not like us to) using the exact same materials and labor and pay the same price (probably even pay more per ski due to our scale). There is no corner cutting to save cost, it’s all the same materials and processes they would use for any other company they produce for. We price our skis lower to be more accessible to those who want a good ski to ride, but could charge $600-800 like most other ski companies coming out of our factory. We also are continually adjusting the construction wanting to make a better and better ski each season, and for only our second season with a product on the market I believe we are doing just fine and on the right path from what started as a ski pressed in our garage to now about 200 total skiers on our skis between this season and last. Ankilla is still the only person to rip out like that, and be it 5 times is mind boggling indeed, so I am unsure how to fully address that issue. Myself (Ian) and the rest of the team stand behind the quality of the product and will continue to tweak and modify each season as needed (for example this year was the first production run of the 96 park ski, it’s a little stiffer than we wanted so tweaks will be made to soften up next seasons version). I’m not going to point fingers and blame the mount or the ski or the skier, definitely a independent case for now unless people start ripping out left and right (would bet money that won’t happen). Really enjoying the small ski community beef though, stokes the flame of a dying industry. Cheers fuckers 
SteezyYeeter
Active member
don't see how this has anything to do with the bindings. he got them mounted at several different places.
[tag=172478]@Ankilla[/tag]
**This post was edited on Jan 3rd 2024 at 9:17:57pm
[tag=172478]@Ankilla[/tag]
**This post was edited on Jan 3rd 2024 at 9:17:57pm
partyandBS
Active member
14577273:MisfitSkis said:Very entertaining indeed. To throw some points out there without making this a penis measuring contest against ankilla; our durability is on par with most brands, we use a poplar and beech core with the standard 10-11mm wood thickness in the center and it tapers out towards the ends, we try to have the beech under where the binding screws go so that it’s a harder wood you are drilling into. We use a heavier fiberglass underfoot to thicken and stiffen the middle third of the ski platform. We come out of a factory that produces other huge name skis (won’t say specifics, they might not like us to) using the exact same materials and labor and pay the same price (probably even pay more per ski due to our scale). There is no corner cutting to save cost, it’s all the same materials and processes they would use for any other company they produce for. We price our skis lower to be more accessible to those who want a good ski to ride, but could charge $600-800 like most other ski companies coming out of our factory. We also are continually adjusting the construction wanting to make a better and better ski each season, and for only our second season with a product on the market I believe we are doing just fine and on the right path from what started as a ski pressed in our garage to now about 200 total skiers on our skis between this season and last. Ankilla is still the only person to rip out like that, and be it 5 times is mind boggling indeed, so I am unsure how to fully address that issue. Myself (Ian) and the rest of the team stand behind the quality of the product and will continue to tweak and modify each season as needed (for example this year was the first production run of the 96 park ski, it’s a little stiffer than we wanted so tweaks will be made to soften up next seasons version). I’m not going to point fingers and blame the mount or the ski or the skier, definitely a independent case for now unless people start ripping out left and right (would bet money that won’t happen). Really enjoying the small ski community beef though, stokes the flame of a dying industry. Cheers fuckers
what city are they made in? i’ll speculate the factor lol. how many pairs of skis did ana have? 5 different skis that this happened to or were some remounts? not a fan of ana personally, i think kit chat is iight sometimes good sometimes cringy as fuck, and i will say he is a good skier and im sure is putting them to work and probably has some validity to a potential issue that could perspire as the early models get more usage
if its the same construction as other skis, then maybe the shape is a factor? particularly the unsubtleness of the edge curve directly under foot.
when i saw the ski that was my initial curiosity was around the performance of the edges due to the shape. but ive never skied it. would love to see a roofbox review of it though
ColoradoDogfart
Active member
Ankilla is on such a power trip rn and it’s so funny, using the metaphor that your bigger than misfit like Tom wallisch is bigger than Line is WILD
fghtoffyrdmns
Active member
You still don’t have the balls to tell this fucking loser to eat shit?
14577273:MisfitSkis said:Very entertaining indeed. To throw some points out there without making this a penis measuring contest against ankilla; our durability is on par with most brands, we use a poplar and beech core with the standard 10-11mm wood thickness in the center and it tapers out towards the ends, we try to have the beech under where the binding screws go so that it’s a harder wood you are drilling into. We use a heavier fiberglass underfoot to thicken and stiffen the middle third of the ski platform. We come out of a factory that produces other huge name skis (won’t say specifics, they might not like us to) using the exact same materials and labor and pay the same price (probably even pay more per ski due to our scale). There is no corner cutting to save cost, it’s all the same materials and processes they would use for any other company they produce for. We price our skis lower to be more accessible to those who want a good ski to ride, but could charge $600-800 like most other ski companies coming out of our factory. We also are continually adjusting the construction wanting to make a better and better ski each season, and for only our second season with a product on the market I believe we are doing just fine and on the right path from what started as a ski pressed in our garage to now about 200 total skiers on our skis between this season and last. Ankilla is still the only person to rip out like that, and be it 5 times is mind boggling indeed, so I am unsure how to fully address that issue. Myself (Ian) and the rest of the team stand behind the quality of the product and will continue to tweak and modify each season as needed (for example this year was the first production run of the 96 park ski, it’s a little stiffer than we wanted so tweaks will be made to soften up next seasons version). I’m not going to point fingers and blame the mount or the ski or the skier, definitely a independent case for now unless people start ripping out left and right (would bet money that won’t happen). Really enjoying the small ski community beef though, stokes the flame of a dying industry. Cheers fuckers
BradFiAusNzCoCa
Active member
Ankilla is a walking liability. He truly is a “no press is bad press” type. Anything for clicks. Support misfit.
fghtoffyrdmns
Active member
The company that supported him despite his bullshit?
14577349:BradFiAusNzCoCa said:
BradFiAusNzCoCa
Active member
They never supported him. He’s just a paying customer so they avoid trashing him
14577353:fghtoffyrdmns said:
fghtoffyrdmns
Active member
Sure didn’t stop them from letting his dipshit ass promote em for em
14577360:BradFiAusNzCoCa said:
Forrest.Gump
Member
14577364:fghtoffyrdmns said:
you are so unstable, did you get fired from washing dishes, after getting fired from ski instructing?
fghtoffyrdmns
Active member
Every comment is a projection per usual, nick lyons
14577365:Forrest.Gump said:
Forrest.Gump
Member
14577367:fghtoffyrdmns said:
i would never let my mom pay my phone bill for me to talk shit on NS APP,
while drinking warm beer,
in utah...
ROFL, project more delusions about cool people ,
your mom is drinking more than ever with her friends, about her failure of a son!
fghtoffyrdmns
Active member
None of these things you are talking about though: happen in reality. So yea, ur fucking insane as you always have been 
. Nothing wrong with seeking mental help for your issues!
. Nothing wrong with seeking mental help for your issues!14577370:Forrest.Gump said:
partyandBS
Active member
14577367:fghtoffyrdmns said:
i think its chris lol. always comes into ride that ankilla dick. didn’t someone mention that the ig live had mentioned NS on it yet the x_ankilla account hasnt been logged into since september? who ever it is, i dont fuck with em lol
Farmville420
Active member
14577373:partyandBS said:
Bro he literally signs his posts with his initials, it's Nick Lyons
Forrest.Gump
Member
14577372:fghtoffyrdmns said:None of these things you are talking about though: happen in reality. So yea, ur fucking insane as you always have been
Reality, no pornhub, or normal girls in utah.
ROFL, if you cant instruct skiing, or wash dishes, mental evaluations are not in your future doogie howser!
yungspliffy
Member
Idk what’s going on but I think he got fired from washing dishes after getting fired from ski instructing
justchillin
Member
14577380:yungspliffy said:
coach mole got fired from drinking warm beer in a gutter.
partyandBS
Active member
14577374:Farmville420 said:
wait was nick lyons thankagaper too?? cause the erraticness and hatred for eheath randomly hitting my inbox align. so that makes sense too.
partyandBS
Active member
14577365:Forrest.Gump said:
14577380:yungspliffy said:
14577382:justchillin said:
i cant tell if i think its hilarious or pathetic that your logging into multiple accounts for this
justchillin
Member
14577373:partyandBS said:
why would he log onto a site that is completely disrespectful towards him?
its incredible you offer up free therapy...
YOU NEED THOSE THERAPY SESSIONS, YOU ARE ACTING LIKE A CHILD IN A SAND BOX, MAD THAT YOU CANT RIDE A RAIL AS GOOD, YOU CANT WALK LIKE OTHER MEN, SO YOU TALK SHIT? YOU ARE ON THAT LIL BOI LEVEL, ITS 2024, MAN THE FUCK UP, MOVE TO UTAH IF THATS HOW YOU AND MOLE WANNA BE IN LIFE, STOP MAKING COLORADO LOOK WEAK. CERTAINLY TAKE BIGGIE OFF YOUR ICON IF YOUR GONNA BE THAT WEAK.
yungspliffy
Member
14577384:partyandBS said:
No I’m legitimately lost but loving all of it
Forrest.Gump
Member
14577383:partyandBS said:
you and coach.moles hatred for ankilla is the only factor at play here.
partyand BS...where did coach mole touch you ?
Lenny-
Active member
14577360:BradFiAusNzCoCa said:
For the past year I was under they assumption they did in some sorta way. Probably would've been a positive business decision to publicly distance themselves from Xan from the get go. I lost all intrest in misfits because they seemed like they fuck with him.
snowfinder
Active member
14577273:MisfitSkis said:
I know what factory you are talking about. Dont know why everyone has to be so hush hush about who makes the skis, it doesnt take much work to find the factories that will work with start ups.
Brule.
Active member
14577219:BLandz said:
Thank you for posting some clarification about the mounting job. I knew something seemed off when they were showing it on live, and I really wasn’t buying the excuse of not using glue in the mount holes.
I really wanted to say something about it other than the glue job, but I’ve never mounted a ski in my life. I just work on ski boots for a living lol.
Newsheepers
Active member
14577422:Brule. said:
this is how my skis looked after I took them out, to be fare though I remounted with a different year of the same binding and used the same holes with no glue or anything and its been fine for a day at the hill. I was just practicing mounting them, but I don't know what the screws are hooking on
SteezyYeeter
Active member
14577395:Lenny- said:
supporting good skier = not core?? i, like most people, only heard of misfit because of xanny, so it's he's been objectively great for their brand.
BLandz
Active member
14577434:SteezyYeeter said:
You somehow manage to consistently have the worst takes i’ve ever read and I don’t even think you’re trolling. I pray that you are just a young kid who doesn’t really understand shit yet because if ur a grown ass man I feel bad for your total lack of awareness.
It doesnt matter how good he is, he can be the best skier in the world, people don’t fw him because he does outlandish shit. Personally, I actually like him, but I don’t agree with everything he says. Plus, Idk how u such a ?? and somehow don’t even know his name isnt Xankilla its X_ankilla, theres a difference lol.
SteezyYeeter
Active member
14577450:BLandz said:
"xankilla has been good for spreading misfit's name" is one of the "worst takes you've ever read" why are you being a jerk and randomly attacking me for having a different opinion? chillout.
partyandBS
Active member
14577434:SteezyYeeter said:
support shitty people no matter their ability level = not core
GrandThings
Active member
Holy fuck has his name been a play on "Xan Killa" the whole time?
I feel dumb, but this explains a lot.
I feel dumb, but this explains a lot.
BradFiAusNzCoCa
Active member
No he explained it on some podcast. It was like he’s rider x and their group is ankilla or idk.
I have been staying away from insta but just watched the two stories left. Damn. I couldn’t even finish the second one. I was cringing so hard. And I hate to use the word cringe but that’s all I can think to describe it.
14577467:GrandThings said:
I have been staying away from insta but just watched the two stories left. Damn. I couldn’t even finish the second one. I was cringing so hard. And I hate to use the word cringe but that’s all I can think to describe it.