Marker Griffon problem

[ixometac]

Has anyone experienced the toe piece of this binding release upwards?I got them mounted on K2 revivals and when I just jump on the slope and hit the ground with tails(strongl, for example when I knock snow off skis) the toe parts sometimes come out upwards.

 

[ixometac]

Or can anyone please tell me if it is norma or what to do with itl? cause I really dont know, it wasnt happening with my last skis...

 

[pinhead_larry]

Idk you might need to get them ajusted to get more pressure from the toe piece.

 

[ixometac]

you mean DIN? ...Ive set it from 10 to 11 but itdidnt seem to affect THIS a lot...it did it again

 

[Blurst]

forward pressure is a compltely different thing.

 

[Abc567def]

yep,
go to you shop and tell them that you have to get your foreword toe pressure adjusted because if you don't know what it is then you shouldn't be adjusting it yourself

 

[ixometac]

Allright then, thanks a lot...however could you just tell me what it is(the forward pressure)? ..I couldnt find anything else that can be set or screwed on the toe piece besides the DIN setting ...thanks

 

[pinhead_larry]

You should probably just take them into a shop. Bad things happen when you fuck with your bindings.

 

[Chompo.]

this. please just dont risk your legs to lave 20 bucks..

 

[ixometac]

ok, I will...Id just like to know what it is...can you tell me, or do you know any page with some advice?

 

[Flowsion]

it's the distance between the heel and toe piece essentially. you need to physically test the bindings to make sure it is set correctly, which you can't do at home. you know what it is now, but you still gotta take them to a shop

 

[ixometac]

So thats simly the setting of the boot sizeThanks for advice, however my bindings are already set at the smallest size (the toe and heel peace nearest to each other) they can...theydrilled it and set it like this in the shopWhat do you think I should do with them, shoud I claim it if it is set wrong? ...I really do not want to redrill brand new skis... Thanks

 

[thisisastickup]

Dude, just take them to the goddamn shop.

 

[SkiTheYeast]

yeah really. no one is going to tell you anything other than GO TO A SHOP!!

no im not mad just making sure he sees it.

 

[ixometac]

Yes, I will ...I was asking what should I want of them?...cause as I set, the heel part cannot be set any nearer to the toe part, it is entirely in the front.

 

[TMiller]

good idea right here

 

[tomPietrowski]

Well if the heel piece is right at the front of the track that is possibly your issue. When mounted and set correctly the heel piece should be in the middle of the track. There is a small screw which adjusts it. Take them to the shop which mounted them and get them to cheak the adjustment with your boot. Did the shop have your boot when they were mounted? They wont charge you to cheack foward pressure its a 1 minute job.