Look pivot 18 gnarly heel piece

ajtxski

ajtxski

New member
Is the heel piece really supposed to be so stiff to the point where it breaks my pole when I try to pop out of them? Then there’s clicking in which takes me nearly jumping into them on one foot. Am I tripping or is there a way to loosen it up?
 
14476270:ajtxski said:
the white tabs do line up with the notches, or does that not matter?
Click to expand...

dawg just go to a fucking shop tech, ask them if they can just take a look and give you some options
 
14476270:ajtxski said:
the white tabs do line up with the notches, or does that not matter?
Click to expand...

Your fwd pressure can still be way off.

Also are your boots interfering with the heelpiece bars at all?

**This post was edited on Nov 4th 2022 at 3:03:21pm
 
14476280:ASSholebomber22 said:
Your fwd pressure can still be way off.

Also are your boots interfering with the heelpiece bars at all?

**This post was edited on Nov 4th 2022 at 3:03:21pm
Click to expand...

Yeah they do, is that fixable at all?

still hard as hell to flip it back down after I slip the boot out without fully disengaging it

**This post was edited on Nov 4th 2022 at 3:58:41pm
 
14476270:ajtxski said:
the white tabs do line up with the notches, or does that not matter?
Click to expand...

white tab actually has nothing to do with forward pressure on a pivot, yes it needs to sit right but doesn’t correlate to correct forward pressure. from what you’ve said it kinda seems like the actual mechanism that the dildo piece revolves around is seized. in theory it is possible to get in there and lube it up but would be a lot of hassle
 
puts me at like 7, I used to ride on 8 on aaatack-13s and I wanted to run at least 10 now on the pivots
 
14476324:powpatrol said:
white tab actually has nothing to do with forward pressure on a pivot, yes it needs to sit right but doesn’t correlate to correct forward pressure. from what you’ve said it kinda seems like the actual mechanism that the dildo piece revolves around is seized. in theory it is possible to get in there and lube it up but would be a lot of hassle
Click to expand...

yeah that seems to be the issue, is there any way to lube it up without dismantling it or nah
 
14476326:ajtxski said:
puts me at like 7, I used to ride on 8 on aaatack-13s and I wanted to run at least 10 now on the pivots
Click to expand...

If you used to ride 7-8, why do you want to run at least a 10?

You're asking for problems OP
 
14476270:ajtxski said:
the white tabs do line up with the notches, or does that not matter?
Click to expand...

ive never had a set of properly adjusted pivots line up with the notches. They are horrible for setting forward pressure

14476326:ajtxski said:
puts me at like 7, I used to ride on 8 on aaatack-13s and I wanted to run at least 10 now on the pivots
Click to expand...

Ill pray for your knees. Youre asking for trouble

Fr though why?
 
14476326:ajtxski said:
puts me at like 7, I used to ride on 8 on aaatack-13s and I wanted to run at least 10 now on the pivots
Click to expand...

How much do you weigh? It could be it's just too high if you're light. I can't really unclip from my pivots with poles and they're only at 10 but I'm a lardass so stepping in isn't an issue.
 
14476324:powpatrol said:
seems like the actual mechanism that the dildo piece revolves around is seized. in theory it is possible to get in there and lube it up but would be a lot of hassle
Click to expand...

sounds like you have done this before ;-)

ok i'm sorry
 
You must log in or register to reply here.
Back
Top