Look P12 Demo adjustment for smaller boots...

F

frank828

Member
So i have some P12 demo bindings on my PE's and currently its setup to use a 320-something boot(mondo 28 on nordica) and i just picked up some last season salomon foils in a 27.5 with something like a 318 length.

What do i need to do to get the new boots to fit?
 
worst case thats what i was planning, i was just hoping it would be something simple.

but if anyone does have the info to do it, i would really appreciate it.

boots are in the mail right now, should get to me by wed or thur and my trip is on friday. i hate being in a rush to get ready.

BTW if i take it to a shop, is it a quick procedure? i would take it to REI but they take 2-3 days normally to get ANYTHING done, even a wax.
 
look at the back of the heel piece. there is a screw and on top of the screw is a semi-circular notch. click the boot in and turn the screw until it is completly flush with the bottom of the notch. click back out and then click in to double check.

...and thats how you set the forward pressure. I know someone did a picture demo a while ago so if you dont know what i am talking about, try searching for it.
 
hmm is that all thats involved? Sounds pretty simple.

I know on the toepiece of the bindings there is a lever that lets u adjust to a range of boot sizes. i know that the new boots fall into the range thats its set on now.

I was thinking there might be something i would actually have to move in and out. If its just clicking in and checking the position of the screw and adjusting accordingly...i think i can do that.

thanks!
 
p12demo.jpg


help me out here, i dont see any screw for forward pressure.

i was able to move the rear demo rail so that the boot clicks in properly. but i see NO other screw anywhere to adjust the forward pressure.

PLEASE HELP!!!
 
You must log in or register to reply here.
Back
Top