line won't hook me up on warranty

bret

bret

Active member
the tail on my mothership delammed like 4 inches and line won't hook me up cuz i got 'em on ebay. so i epoxied it and clamped it and it fell apart again after like a day on the hill. so i'm gonna try and fix it again, and this time maybe put some of those studs in the tail like k2 does on the PE. anyone else done this type of repair and have suggestions?

my level of radness... it just can't... be quantified.
 
Use better glue...fool.

------------------------------------------------------

What's on the other side of that wall?

-'Death.' (Johnny D. after Kristi fell off the back of the PBP wall in 1242)

'I'm in his nigger crew' (my little brother in response to my statement that he was in my 'digger crew')

'My knee hurts' (Jeff Merat after grinding a lunch table for an hour instead of sitting in the ski patrol shack for his torm mcl and acl which he got earlier that day.)

'I'm not asking for any help, just mabe for you to get off your ass.'(my dad)
 
um, epoxy didn't work? Are you using the pussy epoxy or the non pussy epoxy? Plus epoxy needs like 70 degree weather and a day to dry.

-Pat

 
supper glue clamp then duct tape it, wont screw you up. Or there is this thing called gorilla or monkey glue that is suppost to be best stuff.

'My arm hurts, I think I had a Stroke'

-Some girl in my school

'At least my boy friend didnt finger my ass hole with strawberry shampoo'

- Words siad durring a Bitch fight

'Bagger my ass, its probley just Mill House'

- Homer Simpson

'Is it makeing love when 5 migets spank a man covered in Thosand Island dressing'

-Tolken
 
ok but you would have to buy them from a store to have the keep the warranty on the skis wouldnt you

 
i'd like to see someone put studs in like k2's. wouldn't u just need to drill it and stick in some sort of stud?

-Ira

Member No. 8857

*Northeast Cult*
 
all warrenties are voided when purchased from someone other than an authorized dealer. This applys to any item anywhere. You will be hard pressed to find any company out there that doesnt have the same rules.

 
just drill some holes and put some rivets in there. they work the best

'I should put my camera on a tripod - its easier to drink beer that way' - dirty steve

NS royal gangstar

 
alright sounds good. i'll epoxy it and put some rivets in there and see how that works.

my level of radness... it just can't... be quantified.
 
make sure you really rough up the surfaces that the epoxy is gonna bond to with sand paper, then you gotta make sure all the loose dust and debris in there gets blown out. When you clamp it, use a piece of metal on the top and bottom that you clamp onto, that way it applies even pressure to the whole area thats being bonded.

------------------------------------------------------------

Smokey, this is bowling, not Nam. There are Rules.

 
if your a devoted freeskier, then you will have respect for the devoted people that work in the ski industry and buy them from a retailer.........boycott online sales

sorry dude, your S.O.L. on those skis, epoxy and duct tape...but they will still suck...

MIDWESTSKIER PUBLIC RELATIONS

suomi@midwestskier.com

CASANOVA FREERIDE PROMOTIONS

Casanova\'s Ski and Board Shop

601 Apache Dr.

Wakefield, MI 49968

(906) 224-3231

 
take levins advice on the epxoy, after you appoxy it, you can rivet the tip your self, throw 3 rivets in there kinda like on the pe's. I have done it to a pair of old k2 enemies, and skogens, and they will hold for a bit longer.

Sponsored By Your Mom

Drop Cliff's, Not Bombs

Make Turns, Not War
 
dude, of course they won't warranty them, why would they. you didn't pay up, the money you spent went to the guy who bought them, not the company so you did't support them so why would they help you out, i'm not saying good deals are bad but you have to realise there are limits to companies resources and willingness, they can't bend over backwards for everyguy who rides lines and has a problem

Seize the carp
 
don't worry, i have no beef with line at all, and i completely understand why they wouldn't warranty a pair of skis that i got secondhand. i was just asking for some advice on fixing it, that's all. one thing that i didn't do last time was rough up the area before i epoxied it, so all this advice will help this time. thanks.

my level of radness... it just can't... be quantified.
 
take it to a shop that knows that the fuck their doing

i took my beat to crap 1260s to a good shop with one edge torn right out and they threw it back in a shined it up real nice.

and are you guys serious aboot the rivits?

i have never heard of that idea before?

______________________________________

and if you dont know then you dont know.

bitch.
 
have you been living in a hole? the PE's have rivits and so do the seth pistols. but aftermarket rivits i haven't heard of. you shouldn't have told them you got them off e-bay you sould have said you got them at another shop and just lost your recept

.:l[Tyler]l:.

02' 1080 vinni's (169) W/out bindings. For Sale

'You guys don't need Ashton Kutcher, you have Matt Niederhauser' - Amy

 
Rivits were a big thing when people were twin tipping normal skis, because they would delam instantly without 'em.

----------------------------------------

You lewd, crude, rude, bag of pre-chewed food, Dude.

----------------------------------------

...it's my duty

haha.. duty

haha.. diareha

hey lois... diareha

 
i olenicks dad had them in his ten eighties.

______________________

Picture a pasture open to all. It is expected that each herdsman willl try to keep as many cattle on the pasture. when a herder adds a cow to the pasture, he reaps the benefits of a larger herd. Meanwhile the cost of the animal - damage done to the pasture - is divided among all the herdsmen....... the herdsmen are getting nervous. putting more cattle on the pasture isnt helping anyone. (mental commons)

______________________

 
You must log in or register to reply here.
Back
Top