Jester binding help!!!!

0123456789

0123456789

Active member
ok so ive got last years jester if that matters, now refer to the drawing.
boot.png

see that red space? thats what my boot is like, it wiggles up, and down. how can i change that? do i need to bring it to a shop? acuse i did and they didnt change shit. also is that the forward pressure?
thanks NS!
 
HAHHAHAHAHA very nice!

check your forward pressure. the screw in the back should be flush with the binding.

if that doesnt work, get new boots cause youve worn your toe down too much. OR get a new toe pad drilled in.
 
How much room is there? I have the same thing on my griffons, but its very minimal. If there is barely any movement, its fine, but if there is a lot, there could be a solution. You boot could be worn down a lot in the toe piece, and most boots are able to have a plastic riser put on the bottom. If this gap is concerning you, take them to where you got them mounted, and see if they can fix it.
 
boots are new so thats not the prob. i bouth skis last year and brought them to this shop, expeting to need a remount cause i went up 2 boot sizes. they didnt remount or fix the problem when i told them, and still charged me $30. so im looking for a way to do it my self, if its even possible. also theres id guess 3mm of wiggle room
 
i have the same bindings and its easy to adjust it. what you need to do is put your boot into the binding. then on the heel piece there is a screw on the back. if that is not flush then just tighten that screw till it is flush. if that screw is already flush then there might be something wrong with your boots or something and then i would just take it back to the shop.
 
the screw is only flush when the boots are clicked in. so im just gonna bring it to theshop and see if they will do it
 
You must log in or register to reply here.
Back
Top