How to aply Epoxy Glue

[Steezasaurus]

Can anyone give me thourough directions(either in your words or in a jpg.doc) on how to apply epoxy glue to the sidewalls and topsheets of your skis. This thread would not only benefit me but others who are tired of sending their stuff to the shop to get fixed. Thanks

 

[poofartpee]

u sure u dont wanna know how to get to chads gap from the bottom of alta????

 

[4-Front]

Well using epoxy is all about making a good mixture. read about that on google cause there are many different kinds epoxies that have different hardening times and use different mix ratios.

 

[SHastatahoe]

depends on what you are using it with. when I was epoxying my edges for more strength, I would make the mixture, and then apply with toothpics to the needed zone.

 

[Shpadoinkle]

Maybe this will help. I used this on my surfboard.

Read all the way through it. It makes sense. I guess. BTW the wax paper is a must. Try it anyway.

 

[Anti-Hero]

use your fingers to spread a thin even coat on the required area.

 

[alexL]

well ill just give a straight up answer

i usually mix about equal parts of the resin and hardener in a little plastic cup like the ones that come with cough syrup and use little wooden sticks to apply it, its not really hard just glue whatever you need to glue and get some clamps to hold it in place and just wipe away any that you dont need before it hardens, and leave it clamped for as long as you can and it should be good

 

[Orygunski]

Tip: Use a heat gun/hair dryer when mixing to make it flow or spread better.

 

[Pklink04]

wear rubber gloves

 

[Shpadoinkle]

Don't use a hair dryer or your fingers. Bad moves.

 

[GGreene]

and shitty clothes
cus if it gets on you then its a pain in the ass to get off
and it will ruin any shirts/pants it gets on

 

[rather.be.skiing]

you could probly find it on www.skibuilders.com