How to adjust binders

chrismoJBEATS

chrismoJBEATS

Active member
well my urbans are marker m 900's and i just got new (bigger) boots and i need to make it so they fit, can someone that knows or works in a shop go step by step so its gubba be safe
 
I dont think thats what he was asking, no need to be a dick. their urban skis. Theres a metal tab under the heel piece. Put a flat head screw driver under it and turn it up. Then u can slide the binding. Twis the big X in the front on the toe piece. If its a different style just dick around with it, theres noting you can really mess up. Look for a pull tab or somthing you twist, not the DIN tho.
 
did you buy your boots online or at a shop, most shops, or atleast around will refit your binders for free, just take it to the shop so they can do the foward pressure and shit
 
Wrong - there is no metal tab, that would be a Salomon, and i don't know what Twis the big X means. Fine if you are going to use this binding, i will help you out. On the back of the heel there are 2 screws you can adjust, the top one is for adjusting DIN, the bottom one is forward pressure. Click your boot in and adjust the bottom screw so that it is flush (flat) with the back of the heel piece. That is where you want it, if you cant get it flush, you need to re-mount
 
markers usually have screws that when pulled out allow small adjustments, if ur boot isnt much bigger u should be able to do this with out remounting, nad i kno for markers the forward pressure should be set so when u click in, the screw to set the forward pressure should be flush with the binding, for more all mountain a little in and for park a little bit out, but allways around flush
 
if they're for urban and the holes are at least a lil spread out you can mount them a fourth time. I mounted my publice enemies like 7 times on one of the skis cuz it kept rippin out... yea they snapped but they lasted for a while and I was skiin those at resorts on jumps and shit.
 
Tab is on all Rossi Axial 2 and Axium bindings, their junior bindings, Solly bindings, Look PX and Nova bindings, Tyrolias... and probably some more still.

BTW, when adjusting forward pressure with the worm screws found on Marker bindings, Axials, Pivots, and Atomic bindings, you should only adjust it without the boot clicked in. Adjusting the forward pressure with the boot in the binding can cause stuff to break in the binding.
 
You must log in or register to reply here.
Back
Top