So I got some old twins for free from a guy that had been using them on the street for rails and what not.  They have a blown edge on one of them and the middle is shredded up to shit.  There is also a few base shots that have never been filled as well as some edge that is just plain missing.  I decided these are perfect skis for our cabin I can just leave them up there and they should work fine for powder.  I pulled some bingings off some 8 year old ski's bent the brakes out.  Than just eyeballed the mounts drilled and screwed them in.  Should have payed more attention to that cause I ended up drilling them a little too wide so They have to be adjusted all the way in to work.  but they still clamp down and release fine.  This is the part I got really cheap.  So I don't have any petex and I figured what the hell lets glue gun the shit out of these bastards.  I filled the old drill holes with glue gun.  Than filled the base shots with it.  And layed a nice layer of glue over the blown edge.  Waited for it to harden and cut off excess.  I have a bad feeling about it though because I think the glue will stick to the snow like crazy.  But hell it cost me nothin so lets see how it rides.  Going up to our cabin tommorow!
				
			 
 
		 
 
		 
 
		 
 
		 
 
		 
 
		