Help with rails

[I.Need.Steeze]

I am thinking of making a rail setup, and have a square rail kind of like thishttp://www.sportsauthority.com/product/index.jsp?productId=1302402&CAWELAID=115876856would this be good, or should i get a round or wider one?and i did searchbar

 

[kootenayklaus]

Get a longer one. You will realize soon enough that the rail your link just showed me is WAY too short and you will literally touch it and land.

 

[AntiBang]

wayyy too short, u need at least 11 feet imo

 

[Where-am-I]

and build it yourself, $50 is a ripoff

 

[Mr.DarthVader]

make it at least 10-15 feet

 

[Mr.Huck]

Join Build-A-Jib cult and learn how to make a 10 foot long PVC double barrel. I have one of those cheap ass Sports Authority specials. They were meant for skateboards. The metal is as soft as butter. You will notch it out really fast and then your leading edge will catch on it and you will get slammed. Not even worth setting it up. Seriously, make your own PVC rail. You will have way more fun on it.

 

[I.Need.Steeze]

alright thanks i already have the rail and was wondering if it was worth setting up

 

[chardi]

this. this. this.

pvc comes in 10ft segments, so i would recommend making 1 or 2 of these depending on your setup. you can make it however, you want, but i think double barrels are the easiest.

 

[broto]

^^ he's right. make some shotgun PVC rails. two ten footers is recommended. that way you can set them up as a flat rail, down flat, flat down, a frame, flat up, whatever you want. and if you know how to make them right, each one should only cost about 30 bucks.

 

[LittleFoot]

that rail is so damn short. you will attempt a switch up and then land sideways in the landing because it was so short, probably

 

[Keith.]

Build a jib cult.

/end thread.