Forward pressure not setup right?

[vroskii]

To make a long story short, I noticed that my attack bindings forward pressure might not be setup up right?

from what I understand the black tabs have to be aligned with the bumps, but in my case it’s too far back



(Boots are clipped in)

if anyone has experience pls let me know this is all my speculation

**This thread was edited on Aug 20th 2024 at 4:04:51pm

 

[PartyBullshiit]

[video]https://m.youtube.com/watch?v=2Uk4XFiztmI[/video]

 

[johnblaze]

Yeah you need to crank it in a little bit. Not enough forward pressure currently.

 

[vroskii]

Yeah you need to crank it in a little bit. Not enough forward pressure currently.

What I figured haha! Not normal that I release trying a mini nose press lol

 

[Non_State_Actor]

What I figured haha! Not normal that I release trying a mini nose press lol

Yeah, it should just be one click forward from its current position. You want the little lines to be partly in and partly out of the heel piece. There are some good how to videos online for these.

 

[vroskii]

Lil update, took them to a tyrolia certified shop to take a look at them, cause I kept double ejecting when trying to butter on grass.. they are not sure whats wrong..

new hypothesis is that I out perform them, I’ve read online that the attack 11 are for more lightweight and low lever skiers.. (I weight 145 and expert skier)

should I upgrade to a higher din binding?

 

[PartyBullshiit]

Absolutely

 

[vroskii]

Got some pivot 15s for the setup! Can any one confirm if I can remount them at same position(deadcenter) by still using the same boot size ?

found a thread saying I can remount tyrolia holes to pivot without a problem…but it’s a bit outdated just need a second confirmation thanks!

 

[lil.Boye]

Got some pivot 15s for the setup! Can any one confirm if I can remount them at same position(deadcenter) by still using the same boot size ?

found a thread saying I can remount tyrolia holes to pivot without a problem…but it’s a bit outdated just need a second confirmation thanks!

they don't have the same pattern, might have to shift a bit back to drill new holes

 

[rojo.grande]

Got some pivot 15s for the setup! Can any one confirm if I can remount them at same position(deadcenter) by still using the same boot size ?

found a thread saying I can remount tyrolia holes to pivot without a problem…but it’s a bit outdated just need a second confirmation thanks!

You should be fine, move them a half cm to be sure the mount patterns don’t match up. Make sure your shop fills and seals the old holes. You’ll be good to go