FKS 180 Heel Pad Separating

[saucemastrscotty]

This little black piece on the heel piece of my fks 180s is rising up causing it to rise over the white notch unless i push it into place. It looks like there are some little screws on the underside that would tighten it back down but I’d have to remove the heelpiece to get at them. If I did this would it fix the problem and would I be able to just reglue the holes and screw the heel piece back into the same holes?



^faulty binding



Normal one



Screws i think would bring the piece back down

[video]https://www.newschoolers.com/videos/watch/1066764/trim-77F8651F-6411-4DA6-B807-E2C0BCB2BA0C-MOV[/video]

 

[Paul.]

Unfortunately they arent screws. The plastic is just molded in a way that holds that piece in place. One or two of yours have likely broken off allowing the piece to come loose. You might be able to glue it back down or something, but you are probably going to be looking for new brakes soon

 

[saucemastrscotty]

View attachment 1066786

Unfortunately they arent screws. The plastic is just molded in a way that holds that piece in place. One or two of yours have likely broken off allowing the piece to come loose. You might be able to glue it back down or something, but you are probably going to be looking for new brakes soon

Oh true thanks for the info