Din

A

airic

Member
My skis are sitting on the floor and i'm trying to decide what I should set them at. I have them at 7 right now. Im about 120lbs and I shred the 'gnar. If you could post what your din is set at and how much you weigh it would give me a good refrence to get an idea of what I should put em at.

thanks.

___________________

Do what you want to do, be who you want to be.

-Airic
 
yeah i am 110 and im at 4, but i put my ski 'level' 2 you may be 3 so that might come it to effect. also i should really be at a 3.5 but i truned it up

If The women don't find you handsome... atleast they will find you handy

(Red Green)
 
Okay thanks.. they put them at 6 at the shop by the way.

oh and I noticed the tech put the heel pieces at 5 and a half, is there some reason to have the heel piece lower? Or should they usually be the same?

thanks again..

___________________

Do what you want to do, be who you want to be.

-Airic
 
actually, if you check your receipt from the shop tech, it will probably say that he had to set the heels a little lower becase the springs were testing high when set at 6.

i suppose asking the shop tech about it would be too much bother...

 
if you wana tear something then go ahead keep em at 7

aslong as u have decent bindings (i sware by look/rossi) there should be no reason to din up that much, im 160 and boot size 314mm, by the book, type three, i should din at 7/7.5 and thats what i keep it, i dont have issues comin out

*JaSoN*

 
You must log in or register to reply here.
Back
Top