taterbater2
Member
My attack 13s din cover rusted and I can’t see the din is there a way to take it off and get the rust out.
Din window rusted
- Thread starter taterbater2
- Start date
My attack 13s din cover rusted and I can’t see the din is there a way to take it off and get the rust out.
h3nry.
Member
I’m not sure if you can take off just the window but you might be able to pop the entire indicator off. In the rental shop I worked at everyone would jab at their bindings with their poles to get them off so we had to replace the visual indicators sometimes. If you got a small screwdriver up under the clear plastic on the side you might be able to pop it off. I don’t know if it will work on your bindings, but I’ve done it on a couple different kinds of look and rossignol bindings and it has worked. I would just be careful tho, ideally you want to mess with your bindings as little as possible and if you did end up breaking the indicator you would have no idea what your din is. If it looks like the clear piece could easily pop off you could try if you really wanted to. Honestly, it looks like you can see the din good enough to adjust it so I would just leave it
taterbater2
Member
Ok thanks. If I go to a shop will they still remount these in other skis
taterbater2
Member
Also is there a way to replace the indicator
**This post was edited on Apr 20th 2021 at 10:31:16pm
**This post was edited on Apr 20th 2021 at 10:31:16pm
taterbater2
Member
Thank you