Din setting?

S

steezyclezy

Member
I bought some new fks 140s and am 165lb, 6'0". This is a very common binding so what would be a good setting. I have them on ten and they haven't released yet and I'm not sure if they ever will but haven't had a major crash. I guess they would feel different after z10s though.

And before anyone says go to a ski shop, I tried that and they have to set it to fis specifications which is like 7 so that's no help at all.
 
Go to a ski shop it is pretty obvious that you don't know what you are talking about the fis has nothing to do with din setting it is the regulatory body of snowsports competition.Also setting the din isn't as easy as easy a just turning a screwdriver you also need to adjust forward pressure.You can go to a shop and ask them to set your bindings attached whatever and they will just make you sign a waiver saying you don't hold them liable.
 
"Go to a ski shop..."

I agree here. I can't tell you how many skiers and athletes included have fallen prey to bad tuning. Any local ski shop should work with you and if they don't find another one. If you are a customer they may just do it for free or at worst case a nominal fee. My 2 cents.
 
What makes you think 7 is no good? You're a twig a 165 and probably a type 2, that is probably what they should be if that's what the shop says.
 
dude i'm 6'3 190 and i ride a 10. with the elastic travel on fks the din can go slightly lower than regular bindings and still be ok. if you are convinced that a 7 is not enough then put it at an 8, and if that gives you trouble go up from there. its gonna be way better to have a prerelease that teaches you to tighten the din than to tear your acl because they were too tight. honestly at your weight an 8 seems plenty tight enough
 
13300620:SDrvper said:
7 is not enough, we are the same height and you are 10 pounds heavier and 7 is way too soft for me. First day they were coming out a lot (shop put them at 7) so i put em up to 9.

First of all anyone who says ski shop is an idiot, they set it according to regulations for normal weight and skiing, not usually taking into account jumps and rails

Try 9, thats what i ride right now
Click to expand...

Remember that sticky in gear talk that Ced put up that was like this is the one thing you should never say to anyone?
 
13300192:Matt_ said:
Go to a ski shop it is pretty obvious that you don't know what you are talking about the fis has nothing to do with din setting it is the regulatory body of snowsports competition.Also setting the din isn't as easy as easy a just turning a screwdriver you also need to adjust forward pressure.You can go to a shop and ask them to set your bindings attached whatever and they will just make you sign a waiver saying you don't hold them liable.
Click to expand...

Can shops really help you with this? Every time I mount a pair of bindings in the states they set the din to 7 and then I have to crank it up to 15 again. I feel like they're being ridiculously careful. Also people seem to fail to realize that a ski coming of when it shouldn't is equally dangerous to a ski not coming of when it should.
 
Along with what other people have said I would advise you to go to a shop and have them check it out. As someone said earlier it's not all about turning a screw driver, there are other things that go into the mechanics of a binding. Just go to your local ski shop and explain to them honestly what you ride. They are usually pretty decking knowledgable dudes.
 
Thanks guys and I'm very well aware of how bindings work, the first thing I checked when they mounted them was the forward pressure. I had z10s and the only setting vaguely decent was ten, and having it set at max is dangerous anyway. I put these fks on ten because of my old bindings and am asking to see what you think, and now I think I should put them down a bit. If you go to a ski shop in Europe you'll see an fis sticker on skis to prove that a ski shop mounted them to official specifications, however fis is for weak kneed pussies.
 
Start at the recommended DIN and figure it out yourself from there. How do you expect anyone else to help you out?

The FKS binding does have more uncertainty in its adjustment. Like the forward pressure gauge is very rudimentary compared to more modern bindings that have very clear gauges. You basically will just have to learn to get a feel for it.

Your din setting is something you are going to have to figure out for yourself. It tells you how easily you are going to come out of a ski, but nothing about how easily you want to come out of your ski.

On my mogul ski, my din is set much higher than recommended, because I feel safer with a lower chance of pre-release in exchange for a higher chance of them staying on in a fall. On my park ski, my din is basically at recommended, because it's much lower impact and I am more likely to fall in a bunch of different ways.

You have to decide what your priorities are. Don't ask others to do it for you. The recommended DIN was designed to be the best option for 95% of skiers, and is the only thing that other people should advise to you.
 
13300620:SDrvper said:
7 is not enough, we are the same height and you are 10 pounds heavier and 7 is way too soft for me. First day they were coming out a lot (shop put them at 7) so i put em up to 9.

First of all anyone who says ski shop is an idiot, they set it according to regulations for normal weight and skiing, not usually taking into account jumps and rails

Try 9, thats what i ride right now
Click to expand...

You should have your purple name taken away for this. You clearly dont know what youre talking about and tbe fact that you, in any way, represent NS is embarrasing. Jesus
 
13300740:hyllengren said:
Can shops really help you with this? Every time I mount a pair of bindings in the states they set the din to 7 and then I have to crank it up to 15 again. I feel like they're being ridiculously careful. Also people seem to fail to realize that a ski coming of when it shouldn't is equally dangerous to a ski not coming of when it should.
Click to expand...

Generally this is only true when you ski hard enough. If the OP has to ask what DIN he should be at, OP does not fucking rip haha. You know what i mean? When the danger of coming out too early starts to outweight the danger of coming out too late, you should be pretty well versed in how you want your equipment set up haha.
 
13301032:El_Barto. said:
You should have your purple name taken away for this. You clearly dont know what youre talking about and tbe fact that you, in any way, represent NS is embarrasing. Jesus
Click to expand...

This is the best advice in this thread.
 
13300489:Backhaus said:
I'm 45 lbs heavier than you, a 3+ and my DINs are set to 10...
Click to expand...

You're not as good as you think you are...

OP, how do you know 7 isn't good? Did you have pre-release issues at 7? If you did I would try 8 and then 9 if you still have them etc... Otherwise, leave them at 7. It's better to have knees than a high din to tell your friends about. Also, if you do have pre-release issues make sure it's not a forward pressure problem before you crank the old din.
 
13300489:Backhaus said:
I'm 45 lbs heavier than you, a 3+ and my DINs are set to 10...
Click to expand...

You aren't a 3+ skier, unless you just ski like a little girl on the hill. I'm 6'2 190 and I have mine at 14/15 for whenever I not in the park. Generally, for me at least, every time I have been on marker bindings I need to set them higher. But for my pivots I have right now they are at 14.
 
13301265:jakejolo_9 said:
You aren't a 3+ skier, unless you just ski like a little girl on the hill. I'm 6'2 190 and I have mine at 14/15 for whenever I not in the park. Generally, for me at least, every time I have been on marker bindings I need to set them higher. But for my pivots I have right now they are at 14.
Click to expand...

Gotta crank that shit up for those sketchy minnesota double blacks
 
13301309:El_Barto. said:
Gotta crank that shit up for those sketchy minnesota double blacks
Click to expand...

Haha I meant when I'm out west, but I do have them at 16 when I race on the sketchy black diamonds. But one advantage we Midwesters and east coaster have over you westerners is... We learn to ski on ice, which is why Midwest-east coast skiers are the best skiers.
 
13301319:SDrvper said:
The fact that you post so frequently and stupidly on NS at 26 is a lot more embarrassing, its sad actually.

Probably the reason you are so angry all the time on here, hate your life so just start a internet gang to have some online friends, bitch at the same members all the time...

One day you will grow up im sure!
Click to expand...

shut up. Dont give binding advice when you dont know about bindings. End of story.
 
I'm asking because I broke my pelvis from pre release, and I need a general idea of whether you should crank up fks to the same extent as salomons for example
 
13301261:Lucas said:
You're not as good as you think you are...

OP, how do you know 7 isn't good? Did you have pre-release issues at 7? If you did I would try 8 and then 9 if you still have them etc... Otherwise, leave them at 7. It's better to have knees than a high din to tell your friends about. Also, if you do have pre-release issues make sure it's not a forward pressure problem before you crank the old din.
Click to expand...

13301265:jakejolo_9 said:
You aren't a 3+ skier, unless you just ski like a little girl on the hill. I'm 6'2 190 and I have mine at 14/15 for whenever I not in the park. Generally, for me at least, every time I have been on marker bindings I need to set them higher. But for my pivots I have right now they are at 14.
Click to expand...

Haha ok whatever you guys say...I doubt I'm a 3+ also, but told the shop that so they would crank them up from the normal bitch setting.

I've never had a pre release, ski everything on the mountain, but I value my knees if I had a bad crash.

Cue in response of "you ski like a bitch" kthx sure I do!
 
PSA.

If your willy feels funny after banging some rando you get your dick tested. If you are having funny pre releases in your ski bindings go get your bindings tested to make sure they are releasing properly. Failed "in use" testing multiple times with my bindings over the years. This is including steel toe pivot/fks
 
13300995:SDrvper said:
nope, what thread?

The sticky thread. In Gear Talk. It says don't be a moron and tell people how to set their din unless your are a shop tech. But hey way to contribute valuable content to the community! This thread should be deleted.
Click to expand...
 
13302096:Casey said:
nope, what thread?

The sticky thread. In Gear Talk. It says don't be a moron and tell people how to set their din unless your are a shop tech. But hey way to contribute valuable content to the community! This thread should be deleted.
Click to expand...

This thread should be left up ans stickyd as an example of what not to do.

We weigh the same?!?!? Must use the same din...crank that shit up brah, fuck yo knees
 
Holy shit, we get this far into a DIN thread and not one of the "serious" answers have asked for his BSL.

Completely aside from the fact that there's a damn sticky saying don't give binding advice if you don't know what you're talking about, clearly nobody who has given binding advice so far knows what they're talking about.
 
I typed out a long response in this thread a couple days ago, then thought nahhh and deleted it. It was a good decision.
 
There's so much fucking misinformation in this thread it's just sad. First of all, to everyone giving him actual DIN numbers to try, you're all idiots and setting him up to get seriously injured, not to mention the fact that it's a potential liability issue. Also, people trying to come up with a recommended DIN setting with only height and weight are not taking into account the myriad of other factors that contribute to the proper recommended DIN: age, BSL (a shorter boot has greater leverage against a binding and therefore warrants increased spring tension), and ability level, as well as height and weight. So all you people saying "I weigh ___ and I'm ____ tall and my DIN setting is ___ much higher than yours, therefore you must be a huge pussy " I hate to break it to you, but it's probably because you have tiny ass feet and therefore a small dick and are therefore unqualified to give binding advice. Goodnight.

OP: go to a shop if you haven't already figured that out.
 
I've been trying my hardest to resist posting in this thread. First off, BSL (boot sole length) is super important to take into account, as has been said earlier.

Second, it is my opinion that this thread should be deleted by a mod. The amount of misinformation in here is next-level and in this case potentially dangerous. \rant
 
High enough to stay on when they should, low enough to come off when they should.

End thread.
 
13302575:Kreech said:
There's so much fucking misinformation in this thread it's just sad. First of all, to everyone giving him actual DIN numbers to try, you're all idiots and setting him up to get seriously injured, not to mention the fact that it's a potential liability issue. Also, people trying to come up with a recommended DIN setting with only height and weight are not taking into account the myriad of other factors that contribute to the proper recommended DIN: age, BSL (a shorter boot has greater leverage against a binding and therefore warrants increased spring tension), and ability level, as well as height and weight. So all you people saying "I weigh ___ and I'm ____ tall and my DIN setting is ___ much higher than yours, therefore you must be a huge pussy " I hate to break it to you, but it's probably because you have tiny ass feet and therefore a small dick and are therefore unqualified to give binding advice. Goodnight.

OP: go to a shop if you haven't already figured that out.
Click to expand...

93e6b7f1fb3dcfcf761c5f8fd78c24573b75a664a3bfb9de61f53d61784b8245.jpg
 
13302652:Gnarco said:
93e6b7f1fb3dcfcf761c5f8fd78c24573b75a664a3bfb9de61f53d61784b8245.jpg
Click to expand...

Gotta love this post. Pretty spot on.

It wouldn't be that big of a deal if it was not for the fact that skiers come to this forum looking for real guidance and take a lot of what's put up here to heart. Remember, one day it will be your brother, sister, son or daughter.

We all have a responsibility to offer up legitimate help when we open our mouths, otherwise just staple the trap closed.
 
You must log in or register to reply here.
Back
Top