Construction of Rails

johhnn

johhnn

Active member
Before i start, I know there are a couple of decent articles in reference to building your own backyard rails, however, none of these really addressed what i plan to do. All of them invloved using a welder and crazy technical stuff. Im tryin to make a box-ish jib, using 2 old skis, obviously sliding on the bases. however, its frikin impossible to nail through the top sheet, and i have so far nailed some pieces of wood to connect the two skis using the ripped and rough ancient binding holes. Anyone got any ideas or can help me out in putting the ting together strongly?

Since it is a bit specific, I was wondering whether anyone had ideas and that about building a rail without using a welder?

---------------

The path of the righteous man is beset on all sides by the inequities of the selfish and the tyranny of evil men. Blessed is he who, in the name of charity and good will, shepherds the weak through the valley of the darkness. For he is truly his brother's keeper and the finder of lost children. And I will strike down upon thee with great vengeance and furious anger those who attempt to poison and destroy my brothers. And you will know I am the Lord when I lay my vengeance upon you.' I been sayin' that shit for years. And if you ever heard it, it meant your ass. I never really questioned what it meant. I thought it was just a cold-blooded thing to say to a motherfucker before you popped a cap in his ass.

 
mount four 1/2 inch pvc pipes on top of a 2x4 and then build hte frame, slides perfectly and ive made about 3 rails doing that.

-----------------------

NOMICS

Jibij Pro Shop
 
if you can't nail through the surface, use a drill. countersink the hole or you're gonna get hung up on the screws. also, use screws instead of nails

shit happens when you party naked

 
ya, are you fuckin retarded? i dont think you can build something like this if you cant figure out to drill (then countersink) the hole, and use a screw. who the fuck nails throughn skis? its fuckin plastic and fiberglass!

I.L.I.A.G.A CREW!

I drink pepto bismal like its water.. -PJO
 
not if you do it right. cut off a piece of the PVC like a foot long and practice screwing into it

'

~-~NWFT~-~

*Kirsten*
 
and dont screw through both layers of the pipe, drill a hole in the top big enough for the head of the screw to go through and a smaller diameter on the other side. that's kinda hard to understand but do it anyways.

shit happens when you party naked

 
any advice on the type of the best glue or bonder to use, to do one part, not the actual whole thing, like supports and that

---------------

The path of the righteous man is beset on all sides by the inequities of the selfish and the tyranny of evil men. Blessed is he who, in the name of charity and good will, shepherds the weak through the valley of the darkness. For he is truly his brother's keeper and the finder of lost children. And I will strike down upon thee with great vengeance and furious anger those who attempt to poison and destroy my brothers. And you will know I am the Lord when I lay my vengeance upon you.' I been sayin' that shit for years. And if you ever heard it, it meant your ass. I never really questioned what it meant. I thought it was just a cold-blooded thing to say to a motherfucker before you popped a cap in his ass.

 
use a drill bit and drill holes in the top of the pvc pipes in 4 places, then put screws in the pipe and throuhg the bottom of hte pvc into the 2x4. its fucking easy and cheap, and NO it wont crack

----------------------------------------

-Jonathan

Jibij Pro Shop
 
woah, i never thought of that, to use old skis for your rail. I wonder i they would slide nice

________________________________________________________

Chris

Have a JIBARITO!

Guitaring for life

Suicide is your way of telling God, 'You can't fire me, I quit.'
 
I don't imagine it would work to well. Unless you have no edges left on your old skis, because i could see it catching.

_______________________

Screw this I'm going skiing
 
if you really want the old ski rail, pre drill the holes, (make alot, cause skis flex if im not mistaken) then use SCREWS slightly larger than the holes and pre drill your wood too. use thin plywood to bind it together on the outside to make a box, or just bolt on some 4x4's for some lateral support and leave as a rail. you might want to ramove the edges of the old skis prior to construction for the aforementioned catching issue.

fat people should avoid buffets

 
thanks dude, i got something like that, and its almost done, should post pics soon

---------------

The path of the righteous man is beset on all sides by the inequities of the selfish and the tyranny of evil men. Blessed is he who, in the name of charity and good will, shepherds the weak through the valley of the darkness. For he is truly his brother's keeper and the finder of lost children. And I will strike down upon thee with great vengeance and furious anger those who attempt to poison and destroy my brothers. And you will know I am the Lord when I lay my vengeance upon you.' I been sayin' that shit for years. And if you ever heard it, it meant your ass. I never really questioned what it meant. I thought it was just a cold-blooded thing to say to a motherfucker before you popped a cap in his ass.

 
heres a pic of a bit of stencilling and where im heading. that one support part isnt the only one obviously

---------------

The path of the righteous man is beset on all sides by the inequities of the selfish and the tyranny of evil men. Blessed is he who, in the name of charity and good will, shepherds the weak through the valley of the darkness. For he is truly his brother's keeper and the finder of lost children. And I will strike down upon thee with great vengeance and furious anger those who attempt to poison and destroy my brothers. And you will know I am the Lord when I lay my vengeance upon you.' I been sayin' that shit for years. And if you ever heard it, it meant your ass. I never really questioned what it meant. I thought it was just a cold-blooded thing to say to a motherfucker before you popped a cap in his ass.

 
IMGhttp://img.photobucket.com/albums/v478/johnny__boy70/IMG_2990.jpg/IMG

---------------

The path of the righteous man is beset on all sides by the inequities of the selfish and the tyranny of evil men. Blessed is he who, in the name of charity and good will, shepherds the weak through the valley of the darkness. For he is truly his brother's keeper and the finder of lost children. And I will strike down upon thee with great vengeance and furious anger those who attempt to poison and destroy my brothers. And you will know I am the Lord when I lay my vengeance upon you.' I been sayin' that shit for years. And if you ever heard it, it meant your ass. I never really questioned what it meant. I thought it was just a cold-blooded thing to say to a motherfucker before you popped a cap in his ass.

 
fucken hell

IMG_2990.jpg'


---------------

The path of the righteous man is beset on all sides by the inequities of the selfish and the tyranny of evil men. Blessed is he who, in the name of charity and good will, shepherds the weak through the valley of the darkness. For he is truly his brother's keeper and the finder of lost children. And I will strike down upon thee with great vengeance and furious anger those who attempt to poison and destroy my brothers. And you will know I am the Lord when I lay my vengeance upon you.' I been sayin' that shit for years. And if you ever heard it, it meant your ass. I never really questioned what it meant. I thought it was just a cold-blooded thing to say to a motherfucker before you popped a cap in his ass.

 
took about an hour. cost about $40.

ed3.jpg'


not enough in run though... havta wait for more snow.

'Heh Heh ... All Right.' ~Quagmire
 
no, you wont catch on pvc. i havent once caught on it and fallen forward. it doesnt crack either. and it slides very well.

----------------------------------------

-Jonathan

Jibij Pro Shop
 
You must log in or register to reply here.
Back
Top