building boxes

jarossamdb7

jarossamdb7

Active member
are they just plexie-glass on top of a box of wood? how do you get the plexie glass to stay on the wood? (glue?) I know there is that plastic stupp you can heat up and it will bend. is that what you would us for a rainbow?

All I can do is 50-50 a box right now. is sliding one easyer or harder than a flat rail?

____________________

'it would be funny if someone went up to a skier and broke their skis over their knee,'

-my snowboarder friend who shortly afterwards got his ass kicked.
 
easier. but it depends occasionly. i find lots of boxes are sticky especially at breck. not sure about construction though

does anyone else besides me have fantasies about being in a back while it gets robbed and then getting dragged into the vault, getting raped and then getting locked in there to die? - alpentalik

do everynight alpentalik,but when they rape me,im lying face down in a pile of crisp 50's and 100's – lateralis

hey you guys are kinda creepy, but my english isnt so great so i might be missing something - ridelesdiablerets

no... youre not missing anything... - anewmorning
 
well the only one I've been on is one at Eldora. it was really fast. I thought it might be hard because it was that fast and slipery.

____________________

'it would be funny if someone went up to a skier and broke their skis over their knee,'

-my snowboarder friend who shortly afterwards got his ass kicked.
 
you would use nails to hold the plexiglass on top of the wood, just make sure you drill the nails in all the way!

www.spyder.com

'save the trees, wipe your ass with an owl!'

'Micheal Jackson was born a black man and will die a white woman'

 
instead of nails use sup-par screws or whatever they're called. instead of sticking up they actually go into the wood. boxes are definetly easier to slide. it's all confidence and just realize it's hard to hurt yourself on

does anyone else besides me have fantasies about being in a back while it gets robbed and then getting dragged into the vault, getting raped and then getting locked in there to die? - alpentalik

do everynight alpentalik,but when they rape me,im lying face down in a pile of crisp 50's and 100's – lateralis

hey you guys are kinda creepy, but my english isnt so great so i might be missing something - ridelesdiablerets

no... youre not missing anything... - anewmorning
 
I'd use teflon and counter sink the screws while drilling pilot holes.. that should work.

'Don't like hesh - Don't like rap - kicked ol' sally cos she fat - I'm a jerk I'm a punk took a shower cos I stunk - smoked a bong killed a cat - had my nuts attacked by rats dad got nude - I wore a thong - for a hobby I make bombs' Tom DeLounge

 
metal boxes are horrible. they destroy your edges faster than rails

$$$$$$$$$$$$$$$$$$$$

He's a kid that lives down the street, around the corner and under the bridge who can bend over backwards and scratch his ass with his nose hair.

-me

 
i just mightsay use a flathead screw, predrill a hole and put it onto the wood from the bottom, or countersunk and I think lexan works, as does the stuff used on hockey rink boards

'moseley kicks ass, you guys are just jealous of his money and all the hot chicks he gets and his hair...beautiful hair, so soft, oohhhh'-alpentalik

skiing with sunglasses is extrememly gay! but skiing with sun glasses on and goggles on your head is straight.'- Alpentalik

I swear to follow the teachings of JMMT
 
6k posts and cant slide a box? or am i missing something here? Are we talking about just rainbow boxes? Cuz those are pretty hard to build and slide.
 
lexan works fine just really expensive but you can go to hockey rinks and see if they have some puckboard laying around you can have
 
DONT USE PLEXI-GLASS!!! i used it on a box and was learning 270s but it starts to chip off on the sides and i got a piece of plexiglass lodged in my ski. it was right by the edge and went all the way to the base of my ski.
 
ya lexan is really good, you could use it for rainbox boxes cuz it bends without needing to heat it up
 
yes don't use plexi class, it broke on me once, but use the ones that people reccomend, but too apply the top sheet onto your box i would get a drill and a counter sink drill bit, the right one for ur screws and drill holes and put the screws in and make sure the head of the screws doesnt stick out, if so then just get the drill and drill deeper
 
i made one out of pvc pipe i just got a couple 1/4" pieces and screwed them to a wooden frame. it worked fine and it doesn't wreck your skiis or board. and put the screws in from the bottom so you don't have to worry about them.
 
this thread is almost 4 years old. i have a feeling he didn't have 6k posts when he wrote this.
 
you have to counter sink the screws...which means you need to get a counter sink drill bit. It is a drill bit that drills a hole, and also a "sunken in divot" over the hole, which clearly allows the head of the screws to drop below the surface level of the lexan or plexiglass

you can use plexiglass...what i suggest is you cover the surface with fairly thin plywood and then adheare thin plexiglass on it...its really durable even when its cold so it wont chip
 
you have to counter sink the screws...which means you need to get a counter sink drill bit. It is a drill bit that drills a hole, and also a "sunken in divot" over the hole, which clearly allows the head of the screws to drop below the surface level of the lexan or plexiglass

you can use plexiglass...what i suggest is you cover the surface with fairly thin plywood and then adheare thin plexiglass on it...its really durable even when its cold so it wont chip
 
no dont use it will and does chip. it gets the shit torn out of it actually. i glued it to plywood too.

im looking at it right now and it chips whether its cold or not
 
was this what you wanted?

1170596035backyard4forns.JPG


Its not a box, just 2 rails that are set further apart.
 
You must log in or register to reply here.
Back
Top