Binding Ripping Out (Need input)

[SassySloth]

Before we start the skis are K2 Revivals and the Bindings are Salomon STH 14 Drivers

Basically i got these skis in october and they were mounted by a local shop called Corbetts.

now a month of skiing, one of the heel pieces completly ripped out, screws and all when i landed switch.

i took it to Corbetts and they re-mounted them back a little and i trusted that it would be fine.

Well yesterday skiing, i speed checked going into a jump and it ripped out again -__-

I took them in to Corbetts today and i was told this was all my fault even then i feel they drilled the holes too big and it came out.

they are putting heli coils in and see what happens but i wanted your input here and what i should do

im tight on money too

Thanks guys

 

[skithesprings]

those look like the z toe, not the drivers. just sayin.

 

[SassySloth]

ya sorry, thats it

 

[skithesprings]

as for your problem, ask the shop what size bit they're using. they should be using a 3.6mm bit, although I've seen shops use 4.1 for everything when it should only be used for skis with metal.

 

[SassySloth]

Alright, Thanks man +K

 

[Balto]

the cores k2 uses suck, i see more pull outs on k2/line then any other brand, the second any water gets in there it is pretty well gone

 

[SassySloth]

Lovely