ATOMIC INFAMOUS

Dkim_10

Dkim_10

Member
I have the 2016 Atomic Infamous skis, I was wondering if it is common from tip to tail on the ends of the skis on the edges to the side wall kind of separate less than a mm? Because on the ends of my tips are a tiny bit separated from the edge to the sidewalk(around/less than a mm). Even though it had bolts holdting it together does this really matter?
 
Something like this? Not my pic, but i had a similar problem on my infamous 13's, but worse. The base also blew off through the rivets, had to smash it back in every now and then. At least on the older models this was a common issue, thought they would have fixed it by now. It shouldn't make much of a difference unless it's really bad like mine were. Didn't even get to warranty mine...
 
13767678:twatt_chaurus said:
Something like this? Not my pic, but i had a similar problem on my infamous 13's, but worse. The base also blew off through the rivets, had to smash it back in every now and then. At least on the older models this was a common issue, thought they would have fixed it by now. It shouldn't make much of a difference unless it's really bad like mine were. Didn't even get to warranty mine...
Click to expand...

Yeah mine looks exactly like that but not as bad at all.

Do you think I would epoxy it together?
 
13767680:Dkim_10 said:
Yeah mine looks exactly like that but not as bad at all.

Do you think I would epoxy it together?
Click to expand...

If they aren't even that bad i wouldn't bother with fixing them, but i think epoxy is the way to go if you want to.
 
You must log in or register to reply here.
Back
Top