A few questions.

[kyle_skis_stowe]

so i was planing on making a rail like this...

and i have all my wood and pvc pipe but, im not really were i should start screwing the wood togeteher? form the bottom, or the top? but my rail has no gap in between the pvc . also how do i drill through the pvc?

this is my first rail to...

 

[mitchk]

drill a hole in the top and then put the screw thruogh the bottom. then sand off the hole on top.

 

[skiEER]

 

[dandougherty]

build the frame first, like the legs and such, then screw the PVC on through the bottom of the wood and into the bottom of pipe, if you go through the top the pipe will break eaiser at the holes

 

[TheJerz]

put a 2x4 under them, use liquid nails on them duct tape them down tightly and sit in glue for a night. then just screw in at the ends were the openings of the pipe are, what i did and works great.

 

[dandougherty]

damn thats a good idea, but how hard is it to change the pipes when they wear out