Where do you set your adjustable din pin bindings

S

sheddd

Member
I just got some Line Vision 98’s with ATK C-Raider 10’s bindings ‘cause I’m slow and wanted to try a light kit. I was playing with them at the resort to see how they skied, and had an ejection on a small switch landing with the din’s set to 10 and I feel like this wouldn’t have happened on pivots set at 8 or 9. Do you tend to crank the pin bindings up higher? Thx!

**This thread was edited on Mar 29th 2024 at 10:32:53pm

**This thread was edited on Mar 29th 2024 at 10:33:10pm
 
topic:sheddd said:
I just got some Line Vision 98’s with ATK C-Raider 10’s bindings ‘cause I’m slow and wanted to try a light kit. I was playing with them at the resort to see how they skied, and had an ejection on a small switch landing with the din’s set to 10 and I feel like this wouldn’t have happened on pivots set at 8 or 9. Do you tend to crank the pin bindings up higher? Thx!

**This thread was edited on Mar 29th 2024 at 10:32:53pm

**This thread was edited on Mar 29th 2024 at 10:33:10pm
Click to expand...

Not sure why you didnt google this… my ATK Tropheo are fixed din race bindings. My Dynafits are adjustable with a torx screwdrive at the back of the binding. The position of the backing plate comparing to the tower, will give you your din.

So look for a small screw.

Maybe the shop botched the job and 2-3mm clearence was not respected between the binding and boot.
 
You must log in or register to reply here.
Back
Top