Trap box

BillyGoteMan

BillyGoteMan

Active member
im thinkin about building a trap box this weekend, using pvc for the top until i can get some HDPE and put that shit on, i've got a pretty good idea of how i want it but has any one made one?
 
so i made plans, its perfectly to scale, every pixel is 4 inches

trapboxplans.jpg
 
heres the revised i added a foot to the up and the down so the angle is about 24 degree incline instead of 30, its not that much but i dont want it to be really long or really low

Again the pic is perfectly to scale it the dimensions are accurate

lesssteeptrap.jpg
 
i'm, thinking it shudnt be that difficult build it all out of 2x4 and have 2 triangles to stabilize and throw 2 2" pvc pipes on it, eventually ill throw some HDPE on it
 
UPDATE: I decided to build a flat down rail that was 10 ft on the flat then 5 on the down so this weekend i completed the flat section, ill hav crappy camera phone pics tomorrow, but materials cost 37 bucks so not too bad
 
i just got about 100 feet of steel tubes, and im going to build a rail like you. im not sure how big its going to be.. maybe around 30 - 35 feet.
 
if you're gunna build a trap rail/box, make sure its long. Theres a short one at my mtn and its really no fun at all. Its probly longer than what you have drawn up there too
 
for boxs with kinks, do you bend the plastic to cover the corner, ot do you start a new sheet on each kink
 
You must log in or register to reply here.
Back
Top