Switch up on rails

If you’ve never done one then try a front/ blind 2 early so you accidentally swap the very end of the rail and get the feel for them
 
I think it’s very important to have all the 270 out variations before doing swaps because it makes it way easier
 
this suggestion works. did my first front swap yesterday. If you’re only working with smaller rails like i am in my backyard setup what it took for me was to get comfortable front 2 out with less and less speed so that when u start trying to swap u actually have some rail left to tap and get the feel for it

14245225:Young_patty said:
If you’ve never done one then try a front/ blind 2 early so you accidentally swap the very end of the rail and get the feel for them
 
14245266:armchair_skier said:
If you can't slide rails both ways...

Meh, I dont think thats necessary. I learned how to slide rails un-natural BECAUSE of switch ups. I found committing to unnatty rail slides was easier after that. To each their own.
 
If you can, find a setup that's just a big tube lying on the ground. Go slower than you would for a 2 out. Hop on then try jumping off (really jumping up and off the tube, not just sliding off) at the middle of the tube and landing forward with one ski on either side of the tube. Once you have that down just do it again with slightly more rotation, voila: switch-up.
 
14245266:armchair_skier said:
If you can't slide rails both ways...

Definitely helps a lot but idk if it's really a necessity. As long as you can slide a rail pretty comfortably, you kind of have a good intuition on how to stand after the switch up. I find it was almost natural to keep my legs spread as I landed when I learned them.
 
14245722:jjdsteeze said:
I cant think of any of my friends who learned to slide rails both ways before learning switch ups.

Definitely easier to swap to un natural then to get on un natural. I can do swaps with 2s and 4s out and still am a little shaky going straight un natural on.
 
Back
Top