SHOP TECH ? baron and jester.

N

N-Yourd

Member
SOOooo... is the hole pattern for the duke the same as the jester. i want to take off my jesters and put on my barons. but defintaly not redrill. can i use the same holes?
 
the dukes and the barons have the same bolt pattern but the jesters and the griffons have a different bolt pattern.
 
The Duke and Baron share the same hole pattern
The Jester and Griffon share the same hole pattern
Both hole patterns are different, and there is a fifth hole on the toe of the Duke/Baron
 
No, the toe is 4 holes like the jester as is the toe. There is one more hole in the center where the touring switch is. However the majority of the heel and toe holes don't match up.

Baron and Jester share 2 holes, the 2 front

holes in the toe pieces for both bindings have the same spacing in terms of width. Additionally, spacing to the BSL center line is identical.

I know people who have mounted dukes over jester holes of the same BSL no problems in terms of hole closeness as well as being able to re use two holes.
 
Yeah, this is what i meant the reason i said toe was because the 5th is on the toe/hinge part of the binding, but it is closer to the center of the bindings
 
You must log in or register to reply here.
Back
Top