Rails

delete2

Active member
I am doing a little bit of welding and have noticed people might be interested in a backyard rail. I am making one for my self and should have pictures up soon. The design should look something like the picture bellow. Of course I could change height and length. If you are interested at all message me or post in here. The cost would vary on size, but the cost for the rail bellow would probably be around $70 since steel is really expensive.

5979rail.jpg


 
i built something like this but it was a double kink. The one thing i would recomend to you is that on the adjustable part on the legs, get the size of tubing as close as possible for the telescoping part. but have it telescope up so the bigger peice of tubing is on the bottom creating more stability. also you might put rubber shims inside the telescoping part for added stability. It took us some fuckin around to figure this out, so hopefully this will save you some time.

 
15 feet would be big for a small backyard for the people taht dont have a big one, but in my backyard i could do up like a 20 ft, think you could build one of those

____________________

mark d

 
ya....i dont think i would session an 8 foot rail

_____________________

Representin the P-Crew

NA NA NA
 
I dont have room for more than 8. But Im making two of em so I can put em together for 16. Or I can make it a kink (8 flat 8 down). Or what ever.

 
hahahaha D-Spin....that thing is 12 feet! haha and i amde that in 10 minutes for free

_____________________

Representin the P-Crew

NA NA NA
 
i built one in the winter made of pvc pipe and mounted it on a 2 by 4. the supprts were crappy to. they broke like 4 times, i suck at maing rails

roles royce is a car to be driven in, bently is a car to be driven by.
 
Back
Top