POST A PIC OF YOUR RAIL

SDC10760.jpg


SDC10762.jpg


box is 12 feet long, 8 inch wide, about a foot tall. the drop is 6 feet tall. works great with a little water and dish soap
 
also a pic in the dropin thread, the rails are pvc (obviously), 1 1/2 ft tall, and in an 8ft segment and a 7ft segment. we also have a bunch of tiny little single barrels...
1249631004summer_setup.jpg
 
thats sick

where i live(ontario) pipes like that were like 4-5$

so i bought to bigger ones for like 7$ a piece and have a 2 barrell wide rail

nice rail btw
 
mine is about a foot wide and 10 feet long, i would say a foot and a half above the ground. i think its perfect exept it would be smoother with smaller pvc. also, you cant tell but its a down box, not a lot but just enough to keep you going well.
 
So apparently when you buy 2 10-foot 2x4s, they're not the same length...so I have to take this apart and cut the top 2x4 down a bit because right now the whole thing bows visibly...but all in all, pretty good!

1252294077P1020030.JPG


It's a 10-foot shotgun rail
 
1254007204-830970-600x397-1254006833DSC_0185.JPG


lights!(and drop in background)

1254007006-830969-600x904-1254006711DSC_0204_1.JPG


100_4913.jpg


100_4906.jpg


112 feet of rail total between my friend and I. I think I'm gonna bring my stuff over to my friends house though. We're also building a hitching post and getting a big traffic cone (cylinder) jib

 
New 25 foot metal flat bar, i didn't have enough metal to weld on legs, so i just put on some temporary wooden ones
How did u attach the wood legs to the metal?
 
1256357517moto_0166.jpg


1256357582moto_0167.jpg


1256357638moto_0168.jpg


1256357737moto_0170.jpg


1256357817moto_0171.jpg


1256357930moto_0172.jpg


1256358160moto_0173.jpg


1256358198moto_0174.jpg


Sorry about the crappy cell pics.

The box is 8' long, all the wood was stuff just hanging out in my garage(would've made it 10' but not enough material), but it did cost $35 CAD for the 2" diameter PVC piping. It was bought 10' long but home depot cut it down. Also, all of the logo stencils were hand drawn and cut by me.
 
oh

well i was thinkin you need snow

but then its by ur setup so i was wondering if you had a summer vid cuz i didnt think it could be done
 
Heres a rail I found in the bushes of my dirt jumps, so I fixed it up a bit and put some legs on it from scrap wood from my deck, now it is a bit over 2 feet tall.
 
the support on that looks to low. Looks like it would tip over if you got to the top. Those are fun I had 1 in my backyard.
 
You must log in or register to reply here.
Back
Top