Pivot 18s, Will I die?

K

Klinger07

New member
I’m 160lbs and 5,11, 27.5 boots, will a 8 din setting on pivots 18s let go of me? Just trying to figure it out so I don’t destroy my legs.

My lovely Facebook market and newschoolers place set up that I’m talking about

1051720.jpeg
 
You’re probably good, I’m shorter and lighter and I rode 18s at 8 (I know), and I always ejected when I wanted to
 
Rule 1 of used binding din club is don't ask for advice for your used binding dins.

If you can't verify your boots and bindings are serviceable and adjusted correctly while reading a DIN chart take it to a pro. It's really important things are setup right to give you the best chance of not dying.
 
He’s right. I know how to tech bindings, and I tech a few of mine, but I like to take them to a shop afterwards to verify the DIN is within range and the springs aren’t too stiff/soft. It’s just not worth breaking yourself off to save $$.

14466739:T0AST. said:
Rule 1 of used binding din club is don't ask for advice for your used binding dins.

If you can't verify your boots and bindings are serviceable and adjusted correctly while reading a DIN chart take it to a pro. It's really important things are setup right to give you the best chance of not dying.
Click to expand...
 
14466753:BradFiAusNzCoCa said:
He’s right. I know how to tech bindings, and I tech a few of mine, but I like to take them to a shop afterwards to verify the DIN is within range and the springs aren’t too stiff/soft. It’s just not worth breaking yourself off to save $$.
Click to expand...

It doesn't sound like you "tech" bindings much. "I BRING TO SHOP TO MAKE SURE DIN IS WITHIN RANGE!"

LOL what the fuck are you talking about?
 
Release test ?

But yeah, as I re-read that - My comment sounded a bit whack.

14466763:skierman said:
It doesn't sound like you "tech" bindings much. "I BRING TO SHOP TO MAKE SURE DIN IS WITHIN RANGE!"

LOL what the fuck are you talking about?
Click to expand...

**This post was edited on Oct 4th 2022 at 9:04:40am
 
14466739:T0AST. said:
Rule 1 of used binding din club is don't ask for advice for your used binding dins.

If you can't verify your boots and bindings are serviceable and adjusted correctly while reading a DIN chart take it to a pro. It's really important things are setup right to give you the best chance of not dying.
Click to expand...

i don't think he's asking a used-binding-specific question here, i think this is the just the age-old question of whether you can rely on the highest or lowest setting in a binding's din range (P18s are 8-18)

i think you're fine OP. people have gone back and forth about this forever but i've never seen anything that convinces me that these bindings are actually being sold with the edges of their claimed ranges not being functional. i'm sure you're good to go
 
I mean you won't die but personally I'd see if I could source a 14 or 15. The use the same holes so remounting isn't a problem
 
I mean you won't die but personally I'd see if I could source a 14 or 15. The use the same holes so remounting isn't a problem
 
Depending on how you ski, you might end up bumping up. I started at 9 and found 11 to be the sweet spot. and I weigh the same and have the same size boot.
 
Are they mounted? Idk why they look photoshopped or extremely crooked to me lol.. nice setup tho man.

Just use whatever din your ski techs machine tells you too and if it’s not enough just bring it back n tell em to raise it up, it’s nbd
 
14466967:KilaTsunami said:
Are they mounted? Idk why they look photoshopped or extremely crooked to me lol..

Just use whatever din your ski techs machine tells you too and if it’s not enough just bring it back n tell em to raise it up, it’s nbd
Click to expand...

dood
 
14466763:skierman said:
It doesn't sound like you "tech" bindings much. "I BRING TO SHOP TO MAKE SURE DIN IS WITHIN RANGE!"

LOL what the fuck are you talking about?
Click to expand...

You're fucking retarded
 
14466778:3mania said:
I’ve had 20 pairs of Pivots 12.15. 18’s. All set to 10 and i have yet to die.
Click to expand...

I’m gunna get a pair of pivots, but don’t know which one to get. I have to use the prodigy 2.0s so I’m already worried about the weight. You think the 15s will overwhelm me? or will I not feel it at all
 
14467087:owenobrien said:
I’m gunna get a pair of pivots, but don’t know which one to get. I have to use the prodigy 2.0s so I’m already worried about the weight. You think the 15s will overwhelm me? or will I not feel it at all
Click to expand...

The thing about the 15's is they're metal, more durable but heavier, 14's are lighter and prob enough binder for most
 
14467148:KilaTsunami said:
I feel like I’m missing something here lol smh fuck
Click to expand...

haha nothing big, i bet you just took a quick glance on a small screen or whatever, but those bindings are just placed on top of the skis for the shot, they're not mounted. if they were it'd be a straight disaster of a mount
 
14466967:KilaTsunami said:
Are they mounted? Idk why they look photoshopped or extremely crooked to me lol.. nice setup tho man.

Just use whatever din your ski techs machine tells you too and if it’s not enough just bring it back n tell em to raise it up, it’s nbd
Click to expand...

If you're having a shop raise your dins instead of doing it yourself, you shouldn't be choosing your own setting
 
14467149:3mania said:
The thing about the 15's is they're metal, more durable but heavier, 14's are lighter and prob enough binder for most
Click to expand...

So what would u recommend if I’m using the prodigy 2.0s. I plan on using the binding for as long as possible too
 
14467173:owenobrien said:
So what would u recommend if I’m using the prodigy 2.0s. I plan on using the binding for as long as possible too
Click to expand...

15. it'll be more durable and the weight is so close to your foot that you won't notice it much if at all.
 
What have you had previous bindings at? I'm 5'8" 150 and ride 18's at 10 in the front, 11 in the heel. Worked my way up over time after releases when I felt I shouldn't have. Leg strength matters a lot too whether you can handle a din setting or not.
 
14467157:maaattt said:
If you're having a shop raise your dins instead of doing it yourself, you shouldn't be choosing your own setting
Click to expand...

Uhh yeah my guy.. that’s why I told OP to bring ‘er into the shop n not do it himself Lmao
 
14467153:SofaKingSick said:
haha nothing big, i bet you just took a quick glance on a small screen or whatever, but those bindings are just placed on top of the skis for the shot, they're not mounted. if they were it'd be a straight disaster of a mount
Click to expand...

Exactly ? shit looked all janked up
 
14466773:SofaKingSick said:
i don't think he's asking a used-binding-specific question here, i think this is the just the age-old question of whether you can rely on the highest or lowest setting in a binding's din range (P18s are 8-18)

i think you're fine OP. people have gone back and forth about this forever but i've never seen anything that convinces me that these bindings are actually being sold with the edges of their claimed ranges not being functional. i'm sure you're good to go
Click to expand...

This is an age-old question, and to be clear, the answer to this question is that a binding is certified to each release value within its range, so release-wise, there's no difference between running a DIN of 8 on a Pivot 12 or a Pivot 18. If your DIN is in that range, it will work for you. There is some merit in giving yourself 1-2 DIN on each end of the binding in case you need/want to change your DIN setting, though.
 
The impression I always got from this old wisdom was always that “the spring is overcompressed or too loose”. I imagine most companies now account for that “slop”, so to speak. Almost like an old wives tale of skiing

14467336:deelonmusk said:
This is an age-old question, and to be clear, the answer to this question is that a binding is certified to each release value within its range, so release-wise, there's no difference between running a DIN of 8 on a Pivot 12 or a Pivot 18. If your DIN is in that range, it will work for you. There is some merit in giving yourself 1-2 DIN on each end of the binding in case you need/want to change your DIN setting, though.
Click to expand...
 
14467338:BradFiAusNzCoCa said:
The impression I always got from this old wisdom was always that “the spring is overcompressed or too loose”. I imagine most companies now account for that “slop”, so to speak. Almost like an old wives tale of skiing
Click to expand...

For sure, it certainly could have been true at one point. Gear is better than ever now, what a time to be alive.
 
You must log in or register to reply here.
Back
Top