Kids skis filling holes

H

HotdoggingIt

New member
Never had to plug binding holes before and I'm reading up on what people do... But I've got beginner kids 100cm skis, for bunny hills and greens, need to move the toe back 3/4" (no hole overlap) to fit my daughter this season and my gut says those holes could be filled with play-doh and be ok.

The holes won't overlap. Plugs seem like a pia to buy online when I only need 8.

I'm thinking some wood glue or epoxy would be fine in this situation. Do I really need a platic or wood plug? These skis will probably be used another 15 times tops over 3 years and then all my kids will have outgrown them.
 
If you have a ski shop near you, just ask for some plugs. I doubt anyone would charge you for them.
 
Plugs are good, but when I don't have access to a shop I just use epoxy. Hasn't caused any problems yet, should be fine for some kids skis.
 
985667.jpegThanks for the help, here's the gear.

I'm going to fill with epoxy (toothpick to shove it in perhaps) and call it a day.

I scored the skis for $30 and the bindings for $30 a few years back, gotta love that online clearance kids gear pre-season. Really inspires the DIY mounting when it isn't hundreds of dollars at stake.
 
You must log in or register to reply here.
Back
Top