How did you attach your pvc?

[bhill2.0]

I just used a small countersink drill bit and made a hole on the side and drilled in that way.

My rail took 5 minutes when i figured out how i was gonna do it.

 

[line1260skier]

i dtilled a hole the size of the screw in the top and a smaller one in the bottme and drilled it so the screw is inside the pipe.

 

[Thomson.]

I went under, through the wood and into the PVC (drilled through, then put a bolt through that)

 

[parkerhouse]

just drill it right in. you go so fastit doesen't affect you. try to get it to sink in alittle (countersink)

 

[beer.]

I just drilled feeder holes in the sides of the pipe, and screwed them in for my elevator rail. I tested it out this weekend at a little backyard railjam. PVC is the shit, it slides so well.

 

[Desjardins]

drill a hole thru the bottom, and screwinto the wood from underneath

 

[SkiMN]

Drilled holes on one side, put lag bolts through the wood and through the first half of the pipe, works great

 

[ATLskier]

liquid nails on the entire base of the pvc pipes, then screw the pipes into the wood diagonally, using the holes at the end of the pipe so you don't have a hole on the top of the rail.

 

[-+Siver+-]

I would use the bolt idea because it is the strongest for sure