Hoji Dynafit remount.

[cope+]

Hey I have a pair of hojis mounted at recommended with a pair of alpine binders. I'm planing on remount with dynas for a dedicated touring rig. I'm wondering if you guys think I should mount a little up or a little back from the rec line?

 

[tomPietrowski]

It will depend what bindings you have. You may find some will not interfere with the new holes and some may. Best bet is take the old bindings off then go take te skis and your boot to a shop and have them put the jig on and see how things line up. You coul print out paper mounts to check but it will be so much easier if you just have the jig.

 

[brov1]

id say mount recommended, hoji tours a shit ton on them and the recommended mount is where he rides. you'll have a good time with either though.

 

[cope+]

It will depend what bindings you have. You may find some will not interfere with the new holes and some may. Best bet is take the old bindings off then go take te skis and your boot to a shop and have them put the jig on and see how things line up. You coul print out paper mounts to check but it will be so much easier if you just have the jig.

Thanks for the info, i wasn't sure if not having an issue with the holes was a possibility. Are you familiar with and a tech binding that doesn't interfere with the Jesters mount pattern?

 

[tomPietrowski]

Thanks for the info, i wasn't sure if not having an issue with the holes was a possibility. Are you familiar with and a tech binding that doesn't interfere with the Jesters mount pattern?

Honestly not off the top of my head. You may find a radical speed heel fits inside the jester heel maybe but really I would take them to a shop and test out the differnt options and see.